The OBD code B13F4 for Ford indicates a fault with the Right Rear Active Park Assist Sensor system.
Symptoms include the Engine Light being ON.
The cause could be a faulty sensor, wiring harness issues, or problems with the Parking Assist Control Module.
This issue is moderate in severity.
To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Ford b13f4 OBD Code
The Ford B13F4 fault code indicates an issue with the brake pedal position sensor circuit.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of power while driving.
- Engine may run rough or misfire.
- Vehicle may have difficulty starting.
Causes of the Ford b13f4 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford B13F4 include faulty steering angle sensor or wiring issues.
- B13F4 can be caused by a faulty Right Rear Active Park Assist Sensor.
- A Right Rear Active Park Assist Sensor harness that is open or shorted.
- A Right Rear Active Park Assist Sensor circuit with a poor electrical connection.
- A faulty Parking Assist Control Module (PAM).
Fixing Ford Error Code b13f4 Step By Step
To address Ford fault code B13F4, inspect and repair the rear door module.
- To fix the Ford OBDII code B13F4, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the brake pedal switch circuit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found during the inspection, repair or replace the damaged wiring or connectors as necessary.
- Clear the fault code using a diagnostic scanner after completing the repairs.
Cost Of Fixing Ford b13f4 Fault Code
Diagnosing and repairing fault code Ford B13F4 may require replacement of the affected component.
The cost to diagnose and fix Ford OBD code B13F4 is typically based on an estimated repair time of 1. 0 hour, with labor rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the Ford b13f4 OBD Code
Ford code B13F4 relates to a malfunction in the automatic headlamp leveling system.
Ford OBD code B13F4 means Left Rear Turn Lamp Circuit Short to Ground.
This code is triggered by the Body Control Module (BCM) when it detects a short to ground in the circuit for the left rear turn lamp.
The BCM monitors the circuit for abnormalities and sets this code when a short to ground is detected in the left rear turn lamp circuit.
This code is specific to issues related to the left rear turn lamp circuit in the vehicle.
Mechanic’s Tech Notes
For Ford B13F4 code, refer to detailed diagnostic information for accurate troubleshooting and repair guidance.
To diagnose and fix OBDII code Ford B13F4, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the B13F4 fault code.
FAQ
OBD code B13F4 in a Ford indicates an issue with the Right Rear Active Park Assist Sensor. Check sensor, harness, connections, and Parking Assist Control Module for faults.
Common symptoms of OBD code B13F4 in a Ford vehicle include Engine Light ON, caused by issues with the Right Rear Active Park Assist Sensor circuit. Fix: Inspect and repair sensor circuit.
Diagnose OBD code B13F4 in Ford: Symptoms Engine Light ON. Causes Faulty Right Rear Active Park Assist Sensor. Fix Inspect sensor, harness, connectors for damage.
Wrap Up
If your Ford is displaying OBD code b13f4, you may experience issues with the transmission range sensor circuit.
This could be caused by a faulty transmission range sensor, damaged wiring, or poor connections in the circuit.
To address Ford OBD code b13f4, start by inspecting the transmission range sensor and its wiring harness for any signs of damage or corrosion.
Test the sensor’s functionality and ensure all connectors are securely attached.
Replace the sensor if necessary and repair any wiring issues to resolve the problem effectively.
