The OBD code B10D7 for Ford indicates a problem with the Passive AntiTheft System (PATS) key not being programmed or a faulty Body Control Module (BCM).
Symptoms include the Engine Light being ON.
To fix this, review the possible causes mentioned, visually inspect the wiring harness and connectors for damage, and check for broken, bent, or corroded pins.
This issue should be addressed promptly to ensure proper vehicle operation.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Ford b10d7 OBD Code
The Ford B10D7 fault code indicates a potential issue with the passenger airbag status indicator circuit.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Issues with the steering column control module.
- Difficulty starting the vehicle.
- Steering wheel controls not functioning properly.
Causes of the Ford b10d7 OBD Code
Possible triggers for Ford B10D7 include faulty passenger airbag module, wiring issues, or module communication problems.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- B10D7 can be caused by a Passive AntiTheft System (PATS) key not programmed.
- A faulty Body Control Module (BCM).
Fixing Ford Error Code b10d7 Step By Step
Address the issue by inspecting the driver’s door ajar switch for faults or malfunctions.
- To fix the Ford OBDII code B10D7, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Replace any damaged wiring or connectors found during the inspection.
- Perform a reset on the module to clear the code.
- Test drive the vehicle to ensure the code does not return.
- If the code persists, consider reprogramming or replacing the module as necessary.
Cost Of Fixing Ford b10d7 Fault Code
Diagnosing and repairing Ford B10D7 involves troubleshooting the restraint control module circuit for faults.
The cost to diagnose and fix the Ford OBD code B10D7 typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.
Factors like shop rates and complexity of the repair can influence the final cost.
Details of the Ford b10d7 OBD Code
Ford B10D7 code relates to a problem with the passenger airbag indicator circuit.
Ford OBD code B10D7 means Passenger Seatbelt Buckle Switch Circuit Short to Ground.
This code is triggered by the Restraints Control Module (RCM) when it detects a short to ground in the circuit of the passenger seatbelt buckle switch.
The RCM monitors the status of the seatbelt buckle switch to ensure proper operation of the seatbelt system for passenger safety.
Mechanic’s Tech Notes
For Ford B10D7 code, this section provides detailed diagnostic and repair information for technicians.
To diagnose and fix OBDII code Ford B10D7, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If communication issues are detected, reprogramming or reflashing the TCM may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address the root cause of the B10D7 fault code.
FAQ
Ford OBD code B10D7 indicates a problem with the Passive AntiTheft System (PATS) key not programmed or a faulty Body Control Module (BCM). Check wiring and connectors for issues.
To diagnose a B10D7 fault code in a Ford vehicle, check for Engine Light ON. Possible causes include unprogrammed PATS key or faulty BCM. Inspect wiring and connectors for damage.
Common symptoms of a B10D7 fault code in a Ford car include the Engine Light ON and possible causes are PATS key not programmed or faulty BCM.
Wrap Up
If your Ford is displaying OBD code b10d7, you may experience issues with the airbag system, such as a faulty passenger seat weight sensor or a malfunction in the restraint control module.
Wiring harness problems or poor connections can also trigger this code.
To address Ford OBD code b10d7, check the passenger seat weight sensor and its wiring for any damage.
Inspect the restraint control module and related connectors for proper connection and corrosion.
Ensure all components are securely in place to resolve the issue effectively.
