The OBD code B107D for Ford indicates an issue with the Power Liftgate/Trunk Sensor circuit.
Symptoms include the Engine Light being ON.
This code is commonly caused by liftgate misalignment, faulty sensors, or poor electrical connections.
While not a critical issue, it can affect convenience.
To fix, inspect wiring, connectors, and components for damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ford b107d OBD Code
The vehicle displays an airbag warning light on the dashboard with fault code B107D.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of communication with the Restraints Control Module (RCM).
- This may result in the airbag warning light illuminating.
Causes of the Ford b107d OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford fault code B107D include faulty seat track position sensor or wiring issues.
- B107D can be caused by liftgate misalignment.
- A faulty Power Liftgate/Trunk Sensor.
- An open or shorted Power Liftgate/Trunk Sensor harness.
- A poor electrical connection in the Power Liftgate/Trunk Sensor circuit.
- A faulty Power liftgate latch.
- A faulty Power liftgate motor.
- A faulty Liftgate/Trunk Module (LTM).
Fixing Ford Error Code b107d Step By Step
Address the issue by inspecting the passenger airbag module circuit for a Ford B107D fault code.
- To fix the Ford OBDII code B107D, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, consider resetting the module that is associated with the code.
- Perform a software update on the module if necessary.
- Replace the module if resetting and updating do not resolve the B107D code.
Cost Of Fixing Ford b107d Fault Code
Diagnosing and repairing fault code B107D on a Ford may involve replacing a faulty restraint control module.
The cost to diagnose and fix Ford OBD code B107D depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford b107d OBD Code
Ford code B107D relates to a passenger airbag indicator circuit fault.
Ford OBD code B107D means Passenger Seatbelt Buckle Switch Circuit Short to Ground.
This code is triggered by the Restraints Control Module (RCM) when it detects a short to ground in the circuit of the passenger seatbelt buckle switch.
The system involved is the restraint system, specifically related to the passenger seatbelt buckle switch circuit.
Mechanic’s Tech Notes
For Ford code B107D, check for a fault in the passenger airbag indicator circuit.
OBDII code B107D in a Ford typically indicates a problem with the Transmission Control Module (TCM) power circuit.
To diagnose, use a voltmeter to check TCM power and ground connections for proper voltage and continuity.
Utilize a scan tool to communicate with the TCM over the Controller Area Network (CAN) network to verify its responsiveness.
If the wiring harness or connectors appear damaged, inspect them closely for issues like broken, bent, or corroded pins.
Reflashing the TCM software may be necessary to resolve the fault.
FAQ
OBD code B107D in a Ford indicates an issue with the Power Liftgate/Trunk Sensor circuit. Check alignment, sensor, harness, connections, latch, motor, and module for faults.
Code B107D in a Ford car may cause the Engine Light ON. Common symptoms include issues with liftgate alignment, faulty sensors, harness problems, or module faults.
Diagnose OBD code B107D in Ford: Check liftgate alignment, sensor, harness, latch, motor, LTM. Inspect wiring for damage, connector pins for issues.
Wrap Up
If your Ford is displaying OBD code b107d, you may experience issues with the airbag system, such as faulty crash sensors, damaged wiring, or a malfunctioning restraint control module.
These problems can lead to the airbag warning light staying on or the airbags not deploying in a collision.
To address Ford OBD code b107d, start by inspecting the wiring harness and connectors related to the airbag system.
Check for any signs of damage, corrosion, or loose connections.
Test the crash sensors and restraint control module for proper functionality, replacing any faulty components as needed to ensure
