The OBD code B007E for Ford indicates an issue with the Driver Seatbelt Pretensioner circuit.
Symptoms include the Air Bag Warning Light being ON.
This is commonly caused by a faulty pretensioner, open/shorted harness, poor electrical connection, or a faulty Restraints Control Module (RCM).
It is a serious safety concern.
To fix, inspect wiring harness, connectors, and components for damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ford b007e OBD Code
The Ford B007E fault code typically triggers the airbag warning light on the dashboard.
- Symptoms: Air Bag Warning Light ON
Causes of the Ford b007e OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford fault code B007E include faulty passenger seat belt buckle switch or wiring issues.
- B007E can be caused by a faulty Driver Seatbelt Pretensioner.
- A Driver Seatbelt Pretensioner harness that is open or shorted.
- A Driver Seatbelt Pretensioner circuit with poor electrical connection.
- A faulty Restraints Control Module (RCM).
Fixing Ford Error Code b007e Step By Step
Address the issue by inspecting and repairing the driver’s side airbag module.
- To fix the Ford OBDII code B007E, start by reviewing the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any damage.
- Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Check the seat track position sensor for proper operation and connection.
- Replace the seat track position sensor if necessary.
- Clear the fault codes and perform a test drive to verify the repair.
Cost Of Fixing Ford b007e Fault Code
Diagnosing and repairing fault code B007E on a Ford may involve replacing the passenger seat belt buckle.
The cost to diagnose and fix the Ford OBD code B007E depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford b007e OBD Code
Ford code B007E relates to a passenger seatbelt buckle switch circuit fault.
Ford OBD code B007E means Right Front Seatbelt Tension Sensor 1 Circuit Short to Ground.
This code is triggered by the Restraints Control Module (RCM) when it detects a short to ground in the circuit of the right front seatbelt tension sensor 1. The seatbelt tension sensor is part of the occupant restraint system and is designed to detect tension in the seatbelt during a crash event.
When a short to ground is detected in the sensor circuit, the RCM will set code B007E and illuminate the airbag warning light on the instrument panel.
Mechanic’s Tech Notes
For Ford code B007E, check for a faulty passenger seat belt buckle switch.
OBDII code B007E in a Ford typically indicates a problem with the transmission control module (TCM).
To diagnose this, you can check the TCM power and ground using a multimeter to ensure proper voltage levels.
Use a scan tool to communicate with the TCM over the Controller Area Network (CAN) network.
If the TCM does not respond, reprogramming or reflashing it may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check the connector pins for signs of corrosion, bending, or breakage.
This thorough inspection can help pinpoint the issue and guide you towards an effective repair.
FAQ
OBD code B007E in a Ford indicates an issue with the driver seatbelt pretensioner. Check wiring harness, connectors, and RCM for faults causing Air Bag Warning Light.
Common symptoms of B007E in a Ford car include the Air Bag Warning Light ON. Possible causes are a faulty Driver Seatbelt Pretensioner or Restraints Control Module (RCM).
Diagnose OBD code B007E in Ford: Symptoms Air Bag Light ON. Causes Faulty Seatbelt Pretensioner, harness issues, RCM. Fix Inspect wiring, connectors for damage.
Wrap Up
If your Ford is showing OBD code b007e, you may experience issues with the airbag system, such as faulty seat belt pretensioners, damaged wiring harnesses, or a malfunctioning airbag control module.
To address Ford OBD code b007e, start by inspecting the wiring harness and connectors related to the airbag system.
Check for any visible damage, corrosion, or loose connections.
Test the seat belt pretensioners and the airbag control module for proper functionality.
Replace any faulty components as needed to resolve the issue.
