The OBD code B0028 for Ford indicates an issue with the Front Right Side Air Bag Module.
Symptoms include the Air Bag Warning Light being ON.
This is typically caused by a faulty Front Right Side Air Bag Module, open or shorted harness, or poor electrical connection.
It is a serious safety concern.
To fix, inspect the module, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ford b0028 OBD Code
Indication of a potential issue related to the passengerside airbag deployment system.
- Symptoms: Air Bag Warning Light ON
Causes of the Ford b0028 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford B0028 include faulty passengerside airbag deployment indicator circuitry.
- B0028 can be caused by a faulty Front Right Side Air Bag Module.
- A Front Right Side Air Bag Module harness that is open or shorted.
- A Front Right Side Air Bag Module circuit with a poor electrical connection.
Fixing Ford Error Code b0028 Step By Step
To resolve Ford B0028, inspect and repair the driverside airbag module circuit as needed.
- To fix the Ford OBDII code B0028, start by reviewing the possible causes and visually examining the wiring harness and connectors.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, proceed to test the seat belt buckle switch for proper operation.
- Replace the seat belt buckle switch if it is faulty.
- Clear the fault codes using a diagnostic scanner and perform a test drive to ensure the issue is resolved.
Cost Of Fixing Ford b0028 Fault Code
Diagnosing and repairing Ford B0028 involves inspecting and potentially replacing the passengerside airbag module.
The cost to diagnose and fix Ford OBD code B0028 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford b0028 OBD Code
Ford B0028 indicates a problem with the passengerside airbag deployment loop circuit.
Ford OBD code B0028 means Right Side Airbag Deployment Loop Resistance Low.
This code is triggered by the Restraints Control Module (RCM) when it detects low resistance in the right side airbag deployment loop circuit.
The right side airbag deployment loop is part of the airbag system that includes the airbag module, impact sensors, wiring, and connectors.
When the resistance in this circuit falls below a specified threshold, the RCM sets code B0028 to indicate a potential issue with the right side airbag system.
Mechanic’s Tech Notes
For Ford B0028 code, refer to detailed diagnostic information for accurate troubleshooting and repair guidance.
To diagnose and fix OBDII code B0028 in a Ford vehicle, start by visually inspecting the wiring harness and connectors related to the Restraints Control Module (RCM).
Look for any damage or corrosion on the connector pins.
Use a voltmeter to check the power and ground connections to the RCM.
Additionally, utilize a scan tool to confirm communication over the Controller Area Network (CAN) network.
If necessary, consider reprogramming the RCM.
By following these steps, you can pinpoint the issue causing the B0028 fault code and proceed with the appropriate repairs.
FAQ
OBD code B0028 in a Ford means an issue with the Front Right Side Air Bag Module. Check wiring harness, connectors, and components for faults.
Common symptoms for Ford OBD code B0028 include Air Bag Warning Light ON. Causes may be a faulty Front Right Side Air Bag Module or related wiring issues. Fix: Inspect and repair as needed.
Diagnose OBD code B0028 in Ford: Symptoms Air Bag Warning Light ON. Causes Faulty Front Right Side Air Bag Module. Fix Inspect wiring harness and connectors for damage.
Wrap Up
If your Ford is displaying OBD code b0028 and you’re experiencing issues with the passengerside airbag, it could be caused by a faulty passengerside airbag module or a problem with the wiring harness or connectors related to the airbag system.
To address Ford OBD code b0028, start by inspecting the wiring harness and connectors for any signs of damage or corrosion.
Test the passengerside airbag module and its connections for proper functionality.
Replace any faulty components as needed to resolve the issue.
