[SOLVED] Dodge U1417 Code: Fast Fix For Left Wheel Distance Error

The OBD code U1417 for Dodge indicates a communication error between the Antilock Brake System (ABS) Module and the Powertrain Control Module (PCM).

Symptoms include the Engine Light being ON.

This issue is commonly caused by a faulty Vehicle Speed Sensor or wiring harness issues.

It is important to address promptly to ensure proper ABS functionality.

A possible fix involves inspecting and repairing any damaged wiring or connectors related to the ABS Module and PCM.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge u1417 OBD Code

The Dodge U1417 fault code typically triggers warning lights related to the vehicle’s electronic stability control system.

Symptoms: Service 4WD System message on the instrument cluster.
4WD system may not engage properly.
Possible ABS warning light on the dashboard.

Causes of the Dodge u1417 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Dodge fault code U1417 include communication issues within the vehicle’s network system.

U1417 can be caused by a Faulty Vehicle Speed Sensor.
A Faulty Antilock Brake (ABS) Module.
An Antilock Brake Module harness that is open or shorted.
An Antilock Brake Module circuit with poor electrical connection.
Or a Faulty Powertrain Control Module (PCM).

Fixing Dodge Error Code u1417 Step By Step

Resolve Dodge fault code U1417 by inspecting and repairing the CAN C bus circuit.

To fix the Dodge OBDII code U1417, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the ABS module.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Perform a thorough inspection of the ABS module and its connections.
Test the ABS module for proper operation and communication.
Consider resetting the module or updating its software.
Replace the ABS module if necessary.

Cost Of Fixing Dodge u1417 Fault Code

Diagnosing and repairing Dodge fault code U1417 may involve inspecting and fixing the CAN bus communication issue.

The cost to diagnose and fix Dodge OBD code U1417 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.

Details of the Dodge u1417 OBD Code

Dodge fault code U1417 relates to an implausible left wheel distance signal.

Dodge OBD code U1417 means the IMU (Inertial Measurement Unit) is not calibrated.

This code is triggered by the ABS (Antilock Braking System) module based on data received from the IMU.

The IMU is responsible for measuring the vehicle’s acceleration and angular rate, aiding in stability control systems.

When the IMU is not calibrated correctly, it can affect the accuracy of various safety systems like ABS, ESC (Electronic Stability Control), and TCS (Traction Control System).

Mechanic’s Tech Notes

For Dodge code U1417, check for CAN communication issues between the PCM and the FCM.

To diagnose and fix OBDII code U1417 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, focusing on broken, bent, or corroded pins.

Ensure all connections are secure.

If the issue persists, consider consulting a professional for further diagnosis and repair.

FAQ

1. What are the common symptoms associated with Dodge OBD code U1417?

Common symptoms for Dodge OBD code U1417 include Engine Light ON. Possible causes are faulty Vehicle Speed Sensor, ABS Module, or wiring issues. Inspect and repair as needed.

2. What components are typically involved in triggering code U1417 in a Dodge vehicle?

Code U1417 in a Dodge vehicle is typically triggered by a faulty Vehicle Speed Sensor, Antilock Brake Module issues, or PCM problems. Inspect and repair related components as needed.

3. How can I diagnose and repair OBD code U1417 in my Dodge vehicle?

Diagnose U1417 in Dodge: Check Vehicle Speed Sensor, ABS Module, harness, connectors. Inspect for damage, corrosion. Repair as needed.

Wrap Up

If your Dodge is displaying OBD code u1417 and experiencing issues with the vehicle stability control system, it could be caused by a faulty wheel speed sensor, damaged wiring harness, or a malfunctioning ABS module.

To address Dodge OBD code u1417, start by inspecting the wheel speed sensors for any physical damage or corrosion.

Check the wiring harness for any signs of wear or breaks.

Test the connectors for proper connection and continuity.

If no issues are found, consider diagnosing the ABS module for potential faults.