[SOLVED] Dodge U11E3 Code: Fast Fix For Tcmesm Communication Issue

The OBD code U11E3 for Dodge indicates a fault in the Electronic Shift Module (ESM) system.

Symptoms include the Engine Light being ON.

This issue can be caused by a faulty ESM, open/shorted ESM harness, poor electrical connection in the ESM circuit, or open/shorted Controller Area Network Dedicated Powertrain (CANDPT) Bus.

It is important to address this problem promptly to prevent further issues.

A possible fix involves inspecting and repairing any damaged components, wiring harnesses, or connectors related to the ESM system.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge u11e3 OBD Code

The Dodge U11E3 fault code typically triggers when there is a communication issue with the fuel pump control module.

Symptoms: Service Engine Soon Warning Light ON.
Loss of communication with the Steering Control Module.
Possible loss of power steering assist.
Steering wheel may feel heavier than usual.
Difficulty steering at low speeds.

Causes of the Dodge u11e3 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge U11E3 include faulty ABS module, wiring issues, or damaged wheel speed sensors.

U11E3 can be caused by a faulty Electronic Shift Module (ESM).
An open or shorted Electronic Shift Module (ESM) harness.
Poor electrical connection in the Electronic Shift Module (ESM) circuit.
An open or shorted Controller Area Network Dedicated Powertrain (CANDPT) Bus.

Fixing Dodge Error Code u11e3 Step By Step

To resolve Dodge fault code U11E3, inspect and repair the CAN C bus circuit.

To fix the Dodge OBDII code U11E3, start by reviewing the possible causes mentioned above and visually examining the corresponding wiring harness and connectors.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring and connectors, proceed to reset the module that is associated with the U11E3 code.
Perform a software update on the module if necessary.
If the issue persists after the reset and software update, consider replacing the module to resolve the fault code.

Cost Of Fixing Dodge u11e3 Fault Code

Diagnosing and repairing Dodge code U11E3 may involve inspecting wiring, connectors, and the ABS module.

The cost to diagnose and fix Dodge OBD code U11E3 is typically based on 1. 0 hour of labor, with rates ranging from $75 to $150 per hour.

The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.

Details of the Dodge u11e3 OBD Code

Dodge U11E3 code indicates a fault in the vehicle speed sensor circuit.

Dodge OBD code U11E3 means that the Steering Angle Sensor 1 Signal Plausibility Failure has been detected.

This code is triggered by the Steering Angle Sensor module when it detects an implausible signal from the steering angle sensor.

The steering angle sensor is a critical component of the vehicle’s stability control system, providing data on the steering wheel angle to help the system determine the vehicle’s intended direction.

When an implausible signal is detected, it can affect the proper operation of the stability control system, potentially compromising vehicle safety.

Mechanic’s Tech Notes

Detailed information on Dodge fault code U11E3 for ABS module communication issues and possible wiring faults.

To diagnose and fix OBDII code U11E3 on a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve the underlying issue causing the U11E3 fault code.

FAQ

1. What does OBD code U11E3 indicate in a Dodge vehicle?

OBD code U11E3 in a Dodge indicates an issue with the Electronic Shift Module (ESM) or related wiring. Check and repair ESM components and wiring connections.

2. What are the common symptoms associated with code U11E3 in a Dodge?

Common symptoms of U11E3 in a Dodge include the Engine Light ON. Causes may be a faulty Electronic Shift Module (ESM) or related wiring issues. Fix: Inspect and repair wiring connections.

3. How can I diagnose and repair OBD code U11E3 in my Dodge vehicle?

Diagnose and repair OBD code U11E3 in your Dodge by checking ESM, ESM harness, CANDPT Bus for faults. Inspect wiring, connectors for damage, corrosion.

Wrap Up

If your Dodge is displaying OBD code u11e3, you may experience issues with the steering angle sensor.

This could be caused by a faulty sensor, wiring problems, or a poor connection.

The sensor is crucial for stability control and proper steering behavior.

To address Dodge OBD code u11e3, start by checking the wiring harness and connectors related to the steering angle sensor.

Ensure there are no damaged wires, loose connections, or corrosion present.

If everything looks good, consider replacing the steering angle sensor to resolve the issue effectively.