[SOLVED] Dodge U010C Code: Resolve Turbocharger/Supercharger Control Module Communication Issue

The OBD code U010C for Dodge indicates a problem with the Turbocharger/Supercharger Control Module.

Symptoms include the Engine Light being ON.

This issue is commonly caused by a faulty Turbocharger/Supercharger Control Module or related wiring harness issues.

It is crucial to inspect and repair any damaged components or wiring connections to resolve this issue effectively.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge u010c OBD Code

The Dodge U010C fault code indicates a communication error between the PCM and the TCM.

Symptoms: Engine Light ON.
Possible loss of communication with the Transmission Control Module (TCM).
Vehicle may go into limp mode.
Possible harsh shifting from the transmission.

Causes of the Dodge u010c OBD Code

Possible triggers for Dodge fault code U010C include issues with the transmission control module communication circuit.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

U010C can be caused by a faulty Turbocharger/Supercharger Control Module.
A Turbocharger/Supercharger Control Module harness that is open or shorted.
A Turbocharger/Supercharger Control Module circuit with poor electrical connection.
A faulty Powertrain Control Module (PCM).

Fixing Dodge Error Code u010c Step By Step

Address the communication error by inspecting the CAN bus network for faults and repairing as needed.

To fix the Dodge OBDII code U010C, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the Transmission Control Module (TCM).
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Test the voltage and continuity of the wiring between the TCM and the Powertrain Control Module (PCM).
Reset the TCM by disconnecting the battery for a few minutes or using a scan tool.
If the issue persists, consider replacing the TCM after verifying all wiring and connections are in good condition.

Cost Of Fixing Dodge u010c Fault Code

Diagnosing and repairing Dodge code U010C involves testing and potentially replacing the Transmission Control Module (TCM).

The cost to diagnose and fix Dodge OBD code U010C typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

Costs depend on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge u010c OBD Code

Dodge code U010C relates to a lost communication with the fuel injector control module.

Dodge OBD code U010C means a Lost Communication with Turbocharger/Supercharger Control Module A.

This code is triggered by the Engine Control Module (ECM) when it detects a communication error with the turbocharger or supercharger control module.

The signal or system involved in this code is the communication network between the ECM and the turbocharger/supercharger control module.

Mechanic’s Tech Notes

Detailed information on Dodge fault code U010C, relating to the Lost Communication with Turbocharger/Supercharger Control Module.

To diagnose and fix OBDII code U010C in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve issues related to the U010C fault code.

FAQ

1. What are the common symptoms associated with OBD code U010C in a Dodge vehicle?

Common symptoms of OBD code U010C in a Dodge vehicle include Engine Light ON. Causes may be a faulty Turbocharger/Supercharger Control Module or related wiring issues. Fix: Inspect and repair wiring connections.

2. What is the typical root cause of code U010C appearing in a Dodge vehicle?

Code U010C in a Dodge vehicle is typically caused by a faulty Turbocharger/Supercharger Control Module or related wiring issues. Inspect and repair as needed.

3. How can I effectively diagnose and repair OBD code U010C in my Dodge vehicle?

To diagnose and repair OBD code U010C in a Dodge vehicle, check for a faulty Turbocharger/Supercharger Control Module, harness issues, or PCM problems. Inspect wiring and connectors for damage.

Wrap Up

If your Dodge is displaying OBD code U010C and experiencing shifting issues, it may be caused by a faulty Transmission Range Sensor (TRS), damaged wiring in the transmission harness, or a poor electrical connection at the TRS connector.

To address Dodge OBD code U010C, start by inspecting the TRS wiring harness for any signs of damage or corrosion.

Test the TRS connector for proper connection and continuity.

If necessary, replace the Transmission Range Sensor and ensure all connections are secure to resolve the issue.