[SOLVED] Dodge P3497 Code: Fast Fix For Dodge Mds Bank 2

The OBD code P3497 for Dodge indicates an issue with the Multiple Displacement System (MDS) Solenoid.

Symptoms include the Engine Light being ON.

Causes can be low oil pressure, restricted oil passage, or MDS Solenoid fault.

This is a moderate issue.

To fix, inspect the wiring harness, connectors, and components for any damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p3497 OBD Code

The Dodge fault code P3497 indicates an issue with the cylinder deactivation system on the engine.

Symptoms: Engine Light ON.
Reduced engine performance.
Possible rattling noise from the engine.

Causes of the Dodge p3497 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P3497 in Dodge vehicles typically indicates a problem with the cylinder deactivation solenoid performance.

P3497 can be caused by low oil pressure.
A restricted oil passage.
Engine mechanical condition.
A fault in the Multiple Displacement System (MDS) Solenoid.

Fixing Dodge Error Code p3497 Step By Step

Address the issue by inspecting the oil control valve and replacing if necessary.

To fix the Dodge OBDII code P3497, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the variable valve timing (VVT) system.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Test the VVT solenoid for proper operation and resistance.
Replace the VVT solenoid if it fails the test.
Clear the fault codes and perform a test drive to verify that the issue has been resolved.
If the code returns, consider checking the engine oil level and quality, as low oil pressure or dirty oil can also trigger this fault code.

Cost Of Fixing Dodge p3497 Fault Code

The repair for Dodge fault code P3497 typically involves replacing the variable valve timing (VVT) solenoid.

The cost to diagnose and fix the Dodge OBD code P3497 is typically based on an estimated repair time of 1. 0 hour, with labor rates ranging from $75 to $150 per hour.

The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.

Details of the Dodge p3497 OBD Code

Dodge fault code P3497 relates to the cylinder deactivation system on V6 engines.

Dodge OBD code P3497 means that a problem has been detected in the cylinder deactivation system on cylinders 2, 3, or 5. This code is triggered by the Engine Control Module (ECM) when it detects that the actual state of the cylinder deactivation system does not match the commanded state.

The cylinder deactivation system is designed to improve fuel efficiency by deactivating specific cylinders under light load conditions.

When this code sets, it indicates a malfunction in this system, which can lead to drivability issues and decreased fuel economy.

Mechanic’s Tech Notes

For Dodge code P3497, check for issues with the cylinder deactivation solenoid or wiring.

To diagnose and fix OBDII code P3497 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve issues related to code P3497.

FAQ

1. What are the common symptoms associated with OBD code P3497 in a Dodge vehicle?

Common symptoms for OBD code P3497 in a Dodge: Engine Light ON, possible causes include low oil pressure, restricted oil passage, MDS solenoid fault. Fix: Inspect wiring and connectors.

2. What is the typical cause of OBD code P3497 in a Dodge vehicle?

OBD code P3497 in a Dodge is typically caused by low oil pressure, restricted oil passage, engine mechanical issues, or a faulty MDS solenoid.

3. How can I diagnose and fix OBD code P3497 in my Dodge vehicle?

Diagnose P3497 in Dodge: Symptoms Engine Light ON. Causes Low oil pressure, Restricted oil passage, MDS Solenoid fault. Fix Inspect wiring harness, connectors, and components for damage.

Wrap Up

If your Dodge is displaying OBD code P3497, you may experience rough engine idling, reduced engine performance, or even stalling.

This code typically indicates an issue with the variable valve timing (VVT) system, such as a faulty VVT solenoid, oil control valve, or camshaft position sensor.

To address Dodge OBD code P3497, start by checking the VVT solenoid and oil control valve for proper operation and cleanliness.

Inspect the wiring harness and connectors for any signs of damage or corrosion.

Consider testing the camshaft position sensor for correct readings