[SOLVED] Dodge P3441 Code: Fast Fix For Mds Solenoid 6

The OBD code P3441 for Dodge indicates a problem with the Multiple Displacement System (MDS) Solenoid.

Symptoms include the Engine Light being ON.

Causes can be low oil pressure, restricted oil passage, or a faulty MDS Solenoid.

This issue is moderately serious.

To fix it, inspect the wiring harness and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p3441 OBD Code

The Dodge P3441 fault code typically triggers when there is an issue with the cylinder deactivation system.

Symptoms: Engine Light ON.
Rough idle may be experienced.
Engine may lack power during acceleration.
Vehicle may exhibit poor fuel economy.

Causes of the Dodge p3441 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P3441 in Dodge indicates a problem with the Cylinder Deactivation System Bank 2.

P3441 can be caused by low oil pressure.
Restricted oil passage.
Engine mechanical condition.
Faulty Multiple Displacement System (MDS) Solenoid.
Multiple Displacement System (MDS) Solenoid harness is open or shorted.
Multiple Displacement System (MDS) Solenoid circuit poor electrical connection.

Fixing Dodge Error Code p3441 Step By Step

Address the issue by inspecting the intake valve timing control solenoid for proper operation and wiring integrity.

To fix the Dodge OBDII code P3441, first, review the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the electronic throttle control system.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring and connectors, consider replacing the electronic throttle control actuator.
Clear the fault codes from the vehicle’s computer using a scan tool.
Test drive the vehicle to ensure the code does not return.

Cost Of Fixing Dodge p3441 Fault Code

Diagnosing and repairing fault code P3441 on a Dodge typically involves addressing issues with the cylinder deactivation system.

The cost to diagnose and fix the Dodge OBD code P3441 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

Costs depend on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.

Details of the Dodge p3441 OBD Code

Dodge fault code P3441 relates to cylinder deactivation system performance on bank 2.

Dodge OBD code P3441 means Cylinder 6 Deactivation/Intake Valve Control Circuit Low.

This code is triggered when the Engine Control Module (ECM) detects a low voltage condition in the intake valve control circuit for cylinder 6. The ECM monitors this circuit to control the deactivation of the cylinder for fuel economy purposes.

If the voltage is below the specified threshold, the P3441 code is set.

Mechanic’s Tech Notes

Detailed information on diagnosing and repairing Dodge fault code P3441 related to Cylinder Deactivation System Performance.

To diagnose and fix OBDII code P3441 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve issues related to code P3441.

FAQ

1. What are the common symptoms associated with OBD code P3441 in a Dodge vehicle?

Common symptoms of OBD code P3441 in a Dodge vehicle include Engine Light ON, caused by issues like low oil pressure or a faulty MDS solenoid. Fix involves inspecting wiring and connectors.

2. What is the typical cause of OBD code P3441 in Dodge vehicles?

Typical cause of OBD code P3441 in Dodge vehicles is a faulty Multiple Displacement System (MDS) Solenoid or related wiring issues. Inspect and repair as needed.

3. How can I diagnose and fix OBD code P3441 in my Dodge vehicle?

Diagnose P3441 in Dodge: Check oil pressure, MDS solenoid, wiring. Inspect harness, connectors for damage, corrosion. Repair as needed.

Wrap Up

If your Dodge is displaying OBD code P3441, you may experience rough engine performance, reduced power, or even engine stalling.

This code typically indicates a problem with the Cylinder Deactivation System on cylinders 1 and 4, possibly caused by faulty solenoids, wiring issues, or low engine oil levels affecting the system’s operation.

To address Dodge OBD code P3441, start by checking the wiring harness and connectors for any damage or corrosion.

Test the solenoids for proper operation and replace any faulty components.

Ensure the engine oil level is correct to prevent further issues with