[SOLVED] Dodge P2317 Code: Fast Fix For Dodge Ignition Coil Circuit

The OBD code P2317 for Dodge indicates an issue with Ignition Coil ‘F’.

This affects the ignition system.

Symptoms include the Engine Light being ON, rough engine operation.

Common causes are a faulty Ignition Coil ‘F’, open/shorted harness, or poor electrical connection.

While not a severe issue, it should be addressed promptly.

A possible fix involves inspecting and repairing the wiring harness and connectors related to Ignition Coil ‘F’.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p2317 OBD Code

The Dodge P2317 fault code typically triggers when there is an issue with the ignition coil secondary circuit.

Symptoms: Engine Light ON.
Engine may be running rough.
Possible lack of power during acceleration.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p2317 OBD Code

P2317 in Dodge indicates an issue with the ignition coil F secondary circuit.

P2317 can be caused by a faulty Ignition Coil ‘F’.
An open or shorted Ignition Coil ‘F’ harness.
A poor electrical connection in the Ignition Coil ‘F’ circuit.

Fixing Dodge Error Code p2317 Step By Step

Address the issue by inspecting the ignition coil secondary circuit for Dodge fault code P2317.

To fix the Dodge OBDII code P2317, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Check the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring, consider replacing the ignition coil.
Clear the fault codes and test drive the vehicle to verify the repair.
If the code returns, further diagnosis may be needed to pinpoint the exact cause of the issue.

Cost Of Fixing Dodge p2317 Fault Code

The repair for Dodge fault code P2317 may involve replacing the ignition coil.

The cost to diagnose and fix the Dodge OBD code P2317 typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.

Factors like shop rates and complexity of the repair can influence the final cost.

Details of the Dodge p2317 OBD Code

Dodge fault code P2317 relates to ignition coil F secondary circuit malfunction.

Dodge OBD code P2317 means Ignition Coil F Secondary Circuit.

This code is triggered when the Engine Control Module (ECM) detects an electrical issue in the secondary circuit of ignition coil F.

The secondary circuit is responsible for delivering high voltage to the spark plugs for ignition.

When this circuit malfunctions, it can lead to misfires, rough running, and even stalling of the engine.

It is important to inspect the wiring, connectors, and the ignition coil itself to diagnose and repair the issue.

Mechanic’s Tech Notes

This section provides detailed information on diagnosing and fixing Dodge fault code P2317.

To diagnose and fix OBDII code P2317 on a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Additionally, visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve the issue causing the P2317 fault code.

FAQ

1. What are the common symptoms associated with OBD code P2317 in a Dodge vehicle?

Common symptoms of OBD code P2317 in a Dodge vehicle include Engine Light ON, rough engine running. Causes: Faulty Ignition Coil ‘F’, harness issues. Fix: Inspect wiring, connectors for damage.

2. What is the typical cause of OBD code P2317 in a Dodge vehicle?

OBD code P2317 in a Dodge is typically caused by a faulty Ignition Coil ‘F’, open/shorted harness, or poor electrical connection. Inspect and repair as needed.

3. How can I diagnose and repair OBD code P2317 in my Dodge vehicle?

Diagnose and repair OBD code P2317 in Dodge: Symptoms Engine Light ON, rough running; Causes Faulty Ignition Coil ‘F’, harness issues; Fix Inspect wiring, connectors for damage.

Wrap Up

If your Dodge is displaying OBD code p2317 and experiencing rough idling, stalling, or poor acceleration, it may be caused by a faulty ignition coil F secondary circuit.

This could be due to a damaged ignition coil, poor electrical connection, or wiring issues in the ignition coil circuit.

To address Dodge OBD code p2317, check the ignition coil F for proper operation, inspect the wiring harness for any signs of damage or corrosion, and ensure all connectors are securely attached.

Replace the faulty ignition coil if necessary and clear the code to see if the issue is resolved.