[SOLVED] Dodge P2314 Code: Fast Fix For Ignition Coil Circuit

The OBD code P2314 for Dodge indicates a problem with Ignition Coil ‘E’.

This affects the ignition system.

Symptoms include the Engine Light being ON, rough engine operation.

Causes can be a faulty Ignition Coil ‘E’, open/shorted harness, or poor electrical connection.

It’s a moderate issue.

To fix, inspect the wiring harness, connectors, and components for damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p2314 OBD Code

The Dodge is experiencing rough idling and misfires.

Symptoms: Engine Light ON.
Engine may be running rough.
Possible lack of power during acceleration.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p2314 OBD Code

P2314 in Dodge indicates a potential issue with the ignition coil secondary circuit.

P2314 can be caused by a faulty Ignition Coil ‘E’.
An open or shorted Ignition Coil ‘E’ harness.
A poor electrical connection in the Ignition Coil ‘E’ circuit.

Fixing Dodge Error Code p2314 Step By Step

Address the issue by inspecting the ignition coil secondary circuit for Dodge fault code P2314.

To fix the Dodge OBDII code P2314, start by reviewing the possible causes mentioned above.
Visually examine the ignition coil #5 primary circuit wiring harness and connectors for any damage.
Check the connector pins for signs of being broken, bent, pushed out, or corroded.
Repair or replace any damaged components found during the inspection.
Clear the fault codes and perform a test drive to verify that the issue has been resolved.
If the code returns, further diagnostics may be necessary to pinpoint the exact cause of the fault.

Cost Of Fixing Dodge p2314 Fault Code

Diagnosing and repairing fault code P2314 on a Dodge may involve replacing the ignition coil.

The cost to diagnose and fix the Dodge OBD code P2314 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150, depending on shop rates and the complexity of the issue.

Details of the Dodge p2314 OBD Code

Dodge fault code P2314 relates to ignition coil secondary circuit high.

Dodge OBD code P2314 means Ignition Coil D Secondary Circuit.

This code is triggered when the Engine Control Module (ECM) detects a problem with the secondary circuit of ignition coil D.

The secondary circuit is responsible for delivering high voltage to the spark plugs to ignite the airfuel mixture in the combustion chamber.

When this circuit malfunctions, it can lead to misfires, rough running, and even stalling of the engine.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P2314, including possible causes and diagnostic steps for resolution.

To diagnose and fix OBDII code P2314 on a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, focusing on broken, bent, or corroded pins.

Ensure all connections are secure.

If the issue persists, consider consulting a professional for further diagnosis and repair.

FAQ

1. What does OBD code P2314 mean in a Dodge vehicle?

OBD code P2314 in a Dodge means an issue with Ignition Coil ‘E’. Symptoms include Engine Light ON, rough running. Check coil, harness, connections for faults.

2. What are the common symptoms associated with fault code P2314 in a Dodge?

Common symptoms for fault code P2314 in a Dodge include Engine Light ON, rough engine running. Causes: Faulty Ignition Coil ‘E’, open/shorted harness, poor electrical connection. Fix: Inspect wiring and connectors.

3. How can I diagnose and repair OBD code P2314 in my Dodge vehicle?

Diagnose and repair OBD code P2314 in your Dodge: Symptoms include Engine Light ON, rough running. Check Ignition Coil ‘E’, harness, and connections for faults.

Wrap Up

If your Dodge is displaying OBD code P2314, you may experience engine misfires, rough idling, or a lack of power.

This code typically indicates a fault in the ignition coil F primary control circuit, potentially caused by a faulty ignition coil, damaged wiring, or poor electrical connections.

To address Dodge OBD code P2314, start by inspecting the wiring harness and connectors related to the ignition coil F.

Check for any signs of damage, corrosion, or loose connections.

Test the ignition coil for proper function and replace it if necessary to resolve the issue.