[SOLVED] Dodge P2305 Code: Fast Fix For Dodge Ignition Coil Circuit

The OBD code P2305 for Dodge indicates a fault with Ignition Coil ‘B’.

This affects the ignition system.

Symptoms include the Engine Light being ON, rough engine operation.

Common causes are a faulty Ignition Coil ‘B’, open/shorted harness, or poor electrical connection.

It’s a moderate issue.

To fix, inspect wiring and connectors for damage, and check connector pins for any issues.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p2305 OBD Code

The vehicle may experience engine misfires, rough idling, or lack of power with fault code P2305.

Symptoms: Engine Light ON.
Engine may be running rough.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p2305 OBD Code

P2305 in Dodge indicates a potential issue with the ignition coil control circuit.

P2305 can be caused by a faulty Ignition Coil ‘B’.
An open or shorted Ignition Coil ‘B’ harness.
Poor electrical connection in the Ignition Coil ‘B’ circuit.

Fixing Dodge Error Code p2305 Step By Step

Address the issue by inspecting the ignition coil #2 circuit for potential faults or damage.

To fix the Dodge OBDII code p2305, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Check the ignition coil circuit for any faults or issues.
Replace the faulty ignition coil if necessary.
Clear the fault codes and perform a test drive to verify the repair.

Cost Of Fixing Dodge p2305 Fault Code

Diagnosing and repairing fault code P2305 on a Dodge typically involves testing and replacing components.

The cost to diagnose and fix the Dodge OBD code P2305 typically ranges from $75 to $150, based on a labor time estimate of 1. 0 hour.

Factors like shop rates and complexity of the repair can influence the final cost.

Details of the Dodge p2305 OBD Code

Dodge fault code P2305 relates to an ignition coil secondary circuit malfunction.

Dodge OBD code P2305 means that the ignition coil C secondary circuit has a malfunction.

This code is triggered by the Engine Control Module (ECM) when it detects a problem with the secondary circuit of ignition coil C.

The signal or system involved in this fault code is related to the ignition system, specifically the circuit responsible for firing the spark plug in cylinder C.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P2305, including symptoms, causes, and repair procedures.

OBDII code P2305 in a Dodge typically indicates an issue with the ignition coil C secondary circuit.

To diagnose, use a voltmeter to check for proper voltage at the ignition coil connector.

Inspect the wiring harness and connectors for any damage or corrosion.

Test the ignition coil for resistance within specifications.

A scan tool can help monitor live data and confirm the issue.

If necessary, perform a reflash of the Powertrain Control Module (PCM) to address any softwarerelated issues.

Remember to clear the code after repairs are made to see if it returns.

FAQ

1. What are the common symptoms associated with OBD code P2305 in a Dodge vehicle?

Common symptoms of OBD code P2305 in a Dodge vehicle include Engine Light ON, rough engine running. Causes may be faulty Ignition Coil ‘B’. Fix: Inspect wiring harness and connectors.

2. What is the typical cause of OBD code P2305 in a Dodge vehicle?

OBD code P2305 in a Dodge is typically caused by a faulty Ignition Coil ‘B’, open/shorted harness, or poor electrical connection. Inspect and repair as needed.

3. How can I diagnose and repair OBD code P2305 in my Dodge vehicle?

Diagnose and repair OBD code P2305 in Dodge: Symptoms Engine Light ON, rough running; Causes Faulty Ignition Coil ‘B’, harness issues; Fix Inspect wiring, connectors for damage.

Wrap Up

If your Dodge is displaying OBD code p2305 and experiencing rough idling, stalling, or poor acceleration, it may be caused by a faulty ignition coil C primary control circuit.

This could be due to damaged wiring, loose connections, or a defective ignition coil.

To address Dodge OBD code p2305, inspect the wiring harness and connectors related to the ignition coil C primary control circuit.

Check for any signs of damage, corrosion, or loose connections.

If no issues are found, consider replacing the ignition coil to resolve the problem.