[SOLVED] Dodge P2227 Code: Fast Fix For Barometric Pressure Sensor Circuit

The OBD code P2227 for Dodge indicates an issue with the Barometric Pressure (BARO) sensor circuit.

Symptoms include the Engine Light being ON.

Common causes are a faulty BARO sensor, open/shorted sensor harness, poor electrical connection, or a faulty Powertrain Control Module (PCM).

This is a moderate issue that may affect vehicle performance.

To fix, inspect and repair any damaged wiring or connectors related to the BARO sensor circuit.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge p2227 OBD Code

The Dodge P2227 fault code indicates an issue with the barometric pressure sensor circuit.

Symptoms: Engine Light ON.
Possible lack of power during acceleration.
Engine may run rough or misfire.

Causes of the Dodge p2227 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P2227 in Dodge indicates an issue with the barometric pressure sensor circuit high.

P2227 can be caused by a faulty Barometric Pressure (BARO) sensor.
A Barometric Pressure (BARO) sensor harness that is open or shorted.
A Barometric Pressure (BARO) sensor circuit with poor electrical connection.
A faulty Powertrain Control Module (PCM).

Fixing Dodge Error Code p2227 Step By Step

Address the issue by inspecting the barometric pressure sensor circuit for Dodge code P2227.

To fix Dodge OBDII code P2227, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Check the wiring connections to the MAP sensor for any issues.
Replace the MAP sensor if necessary.
Clear the fault codes and perform a test drive to verify the repair.

Cost Of Fixing Dodge p2227 Fault Code

Diagnosing and repairing fault code P2227 on a Dodge may involve inspecting the barometric sensor circuit.

The cost to diagnose and fix the Dodge OBD code P2227 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150, excluding parts.

Costs may vary based on shop rates and the complexity of the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p2227 OBD Code

Dodge fault code P2227 relates to the barometric pressure sensor circuit low.

Dodge OBD code P2227 means that the barometric pressure sensor is indicating a low voltage condition.

This code is triggered by the Engine Control Module (ECM) when it detects that the signal from the barometric pressure sensor is outside the expected voltage range.

The barometric pressure sensor is part of the vehicle’s engine management system and helps the ECM calculate air density and adjust fuel delivery accordingly.

When P2227 is set, it indicates a potential issue with the barometric pressure sensor or its circuit.

Mechanic’s Tech Notes

P2227 indicates a problem with the barometric pressure sensor circuit in a Dodge vehicle.

To diagnose and fix OBDII code P2227 on a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If communication issues are found, reprogramming the TCM may be necessary.

Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

Address any issues found during the inspection to resolve the P2227 fault code.

FAQ

1. What are the common symptoms associated with OBD code P2227 in a Dodge vehicle?

Common symptoms of OBD code P2227 in a Dodge vehicle include Engine Light ON, caused by a faulty Barometric Pressure (BARO) sensor or related wiring issues.

2. What is the typical cause of OBD code P2227 in a Dodge vehicle?

OBD code P2227 in a Dodge is typically caused by a faulty Barometric Pressure (BARO) sensor, sensor harness issues, or PCM problems. Inspect and repair as needed.

3. How can I diagnose and fix OBD code P2227 in my Dodge vehicle?

Diagnose and fix OBD code P2227 in your Dodge: Symptoms Engine Light ON; Causes Faulty BARO sensor, harness issues, PCM; Fix Inspect wiring, connectors for damage.

Wrap Up

If your Dodge is displaying OBD code P2227 and you notice issues with the barometric pressure sensor circuit, it could be caused by a faulty barometric pressure sensor, wiring problems, or a poor connection in the sensor circuit.

To address Dodge OBD code P2227, start by checking the barometric pressure sensor for proper operation and inspecting the wiring harness for any damage or loose connections.

Test the sensor’s output signal and ensure the sensor is receiving the correct voltage supply for accurate readings.