[SOLVED] Dodge P2035 Code: Fast Fix For Egt Sensor Low

The OBD code P2035 for Dodge indicates an issue with the Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 2. Symptoms include the Engine Light being ON.

The code is typically caused by a faulty sensor, wiring harness issues, exhaust leaks, or particulate matter buildup.

It’s important to address promptly to prevent potential damage.

A possible fix involves inspecting and repairing the sensor, wiring, and connectors.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p2035 OBD Code

The Dodge P2035 fault code indicates an issue with the exhaust gas temperature sensor circuit.

Symptoms: Engine Light ON.
Reduced engine performance.
Rough idle.
Hesitation during acceleration.
Increased fuel consumption.

Causes of the Dodge p2035 OBD Code

Possible triggers for Dodge fault code P2035 include faulty exhaust gas temperature sensor or wiring issues.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P2035 can be caused by a faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 2.
An open or shorted Exhaust Gas Temperature Sensor Bank 2 Sensor 2 harness.
A poor electrical connection in the Exhaust Gas Temperature Sensor Bank 2 Sensor 2 circuit.
Exhaust leaks.
Excessive particulate matter buildup on the sensor.

Fixing Dodge Error Code p2035 Step By Step

Replace the exhaust gas temperature sensor 2 circuit with a new sensor to address code P2035.

To fix the Dodge OBDII code P2035, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the exhaust gas temperature sensor circuit.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring and connectors, proceed to test the exhaust gas temperature sensor itself for proper operation.
Replace the exhaust gas temperature sensor if it is faulty.
Clear the fault codes from the vehicle’s computer using a scan tool.
Finally, test drive the vehicle to ensure the code does not return, indicating a successful repair.

Cost Of Fixing Dodge p2035 Fault Code

The repair for Dodge fault code P2035 typically involves replacing the exhaust gas temperature sensor.

The cost to diagnose and fix the Dodge OBD code P2035 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.

Details of the Dodge p2035 OBD Code

Dodge fault code P2035 relates to the exhaust gas temperature sensor circuit low.

Dodge OBD code P2035 means the Exhaust Gas Temperature (EGT) Sensor Circuit Low Voltage Bank 1 Sensor 2. This code is triggered by the Engine Control Module (ECM) when it detects a low voltage condition in the EGT sensor circuit for the second sensor in bank 1 of the exhaust system.

The EGT sensor measures the temperature of the exhaust gases and helps the ECM monitor emissions and engine performance.

Mechanic’s Tech Notes

Detailed information on Dodge code P2035, which relates to the exhaust gas temperature sensor circuit low input.

To diagnose and fix OBDII code P2035 on a Dodge, start by visually inspecting the wiring harness and connectors related to the transmission control module (TCM).

Look for any damage or corrosion on the connector pins.

Use a multimeter to check the TCM’s power and ground connections.

Additionally, use a scan tool to confirm if the TCM communicates over the Controller Area Network (CAN) network.

If necessary, consider reprogramming or reflashing the TCM.

This process can help identify and address issues related to the TCM voltage supply, ground connections, or communication faults that trigger code P2035.

FAQ

1. What is the common cause of OBD code P2035 in a Dodge vehicle?

The common cause of OBD code P2035 in a Dodge vehicle is a faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 2 or related wiring issues.

2. How can I diagnose and fix OBD code P2035 in my Dodge vehicle?

Diagnose and fix OBD code P2035 in your Dodge: Symptoms Engine Light ON; Causes Faulty EGTS Bank 2 Sensor 2, harness issues; Fix Inspect wiring, connectors for damage.

3. Is it safe to continue driving with OBD code P2035 present in a Dodge vehicle?

It is not safe to continue driving with OBD code P2035 in a Dodge vehicle. Check and repair the Exhaust Gas Temperature Sensor Bank 2 Sensor 2 system immediately.

Wrap Up

If your Dodge is displaying OBD code P2035, you may experience poor engine performance, rough idling, or stalling.

This code typically indicates an issue with the exhaust gas temperature sensor circuit, possibly caused by a faulty sensor, damaged wiring, or poor connections.

To address Dodge OBD code P2035, start by inspecting the exhaust gas temperature sensor and its wiring harness for any signs of damage or corrosion.

Test the sensor’s resistance and ensure proper connector engagement.

Replace the sensor if necessary and repair any wiring issues to resolve the fault.