[SOLVED] Dodge P2016 Code: Resolve Intake Manifold Runner Position Sensor

The OBD code P2016 for Dodge indicates a fault with the Intake Manifold Runner Position Sensor/Switch.

Symptoms include the Engine Light being ON.

This code is usually caused by issues like a faulty sensor, wiring problems, or mechanical obstructions.

It’s important to address promptly to prevent potential engine performance issues.

A possible fix involves inspecting the sensor, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p2016 OBD Code

The Dodge P2016 fault code typically triggers when there is an issue with the intake manifold runner control circuit.

Symptoms: Engine Light ON.
Reduced engine power.
Stalling at idle.
Rough idle.

Causes of the Dodge p2016 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P2016 in Dodge indicates a problem with the intake manifold runner control circuit low.

P2016 can be caused by a faulty Intake Manifold Runner Position Sensor/Switch.
An open or shorted Intake Manifold Runner Position Sensor/Switch harness.
A poor electrical connection in the Intake Manifold Runner Position Sensor/Switch circuit.
Mechanical concerns like binding, seizing, damage, or obstruction of IMRC hardware.

Fixing Dodge Error Code p2016 Step By Step

Address the intake manifold runner position sensor circuit low voltage issue on a Dodge with code P2016.

To fix the Dodge OBDII code P2016, start by reviewing the possible causes mentioned above.
Visually examine the intake manifold runner control (IMRC) solenoid wiring harness and connectors.
Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring and connectors, consider testing the IMRC solenoid for proper operation.
Replace the IMRC solenoid if it is faulty.
Clear the fault codes from the vehicle’s computer using a scan tool.
Perform a test drive to verify that the P2016 code does not return.

Cost Of Fixing Dodge p2016 Fault Code

The repair for Dodge code P2016 typically involves replacing the intake manifold runner control.

The cost to diagnose and fix a Dodge OBD code P2016 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.

Details of the Dodge p2016 OBD Code

Dodge code P2016 relates to the intake manifold runner control circuit low bank 1.

Dodge OBD code P2016 means that the intake manifold runner position sensor/switch circuit is low.

This code is triggered by the Engine Control Module (ECM) when it detects a low voltage signal from the intake manifold runner position sensor/switch.

The intake manifold runner position sensor/switch is part of the intake manifold and is responsible for monitoring the position of the intake manifold runners.

This information is used by the ECM to optimize engine performance and fuel efficiency based on driving conditions.

Mechanic’s Tech Notes

Detailed information on Dodge code P2016, including symptoms, causes, and solutions for effective troubleshooting.

To diagnose and fix OBDII code P2016 on a Dodge, start by visually inspecting the wiring harness and connectors related to the intake manifold runner control system.

Look for any damage or corrosion on the components and connector pins.

Use a voltmeter to check the power and ground connections to the TCM.

Utilize a scan tool to confirm communication over the CAN network.

If necessary, consider reprogramming the TCM.

This comprehensive approach will help identify and address issues causing the P2016 fault code.

FAQ

1. What are the common symptoms associated with OBD code P2016 in a Dodge vehicle?

Common symptoms of OBD code P2016 in a Dodge vehicle include Engine Light ON and potential issues with the Intake Manifold Runner Position Sensor/Switch.

2. What is the typical cause of OBD code P2016 in a Dodge vehicle?

The typical cause of OBD code P2016 in a Dodge vehicle is a faulty Intake Manifold Runner Position Sensor/Switch or related wiring issues.

3. How can I diagnose and fix OBD code P2016 in my Dodge vehicle?

Diagnose and fix OBD code P2016 in Dodge: Symptoms Engine Light ON. Causes Faulty Intake Manifold Runner Position Sensor/Switch. Fix Inspect sensor, wiring, and connectors for issues.

Wrap Up

If your Dodge is displaying OBD code p2016 and experiencing rough idling or stalling, it may be caused by a faulty intake manifold runner control (IMRC) actuator, a stuck intake manifold runner, or wiring issues in the IMRC system.

To address Dodge OBD code p2016, check the IMRC actuator for proper operation, inspect the wiring harness for any damage or loose connections, and ensure the intake manifold runners move freely without any obstructions.

Replace the IMRC actuator if necessary and clear the fault codes to reset the system.