The OBD code P2015 for Dodge indicates a fault with the Intake Manifold Runner Position Sensor/Switch.
Symptoms include the Engine Light being ON.
This code is commonly caused by issues like a faulty sensor, wiring harness problems, or mechanical obstructions.
While not a severe issue, it can affect engine performance.
A possible fix involves inspecting the sensor, wiring, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Dodge p2015 OBD Code
The Dodge P2015 fault code typically triggers when there’s an issue with the intake manifold runner control circuit.
- Symptoms: Engine Light ON.
- Reduced engine power.
- Rough idle.
- Hesitation during acceleration.
Causes of the Dodge p2015 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
The fault code P2015 on a Dodge typically indicates a problem with the intake manifold runner control.
- P2015 can be caused by a faulty Intake Manifold Runner Position Sensor/Switch.
- An open or shorted Intake Manifold Runner Position Sensor/Switch harness.
- A poor electrical connection in the Intake Manifold Runner Position Sensor/Switch circuit.
- Mechanical concerns like binding, seizing, damage, or obstruction of IMRC hardware.
Fixing Dodge Error Code p2015 Step By Step
Address the intake manifold runner control stuck closed condition indicated by Dodge P2015 fault code.
- To fix the Dodge OBDII code P2015, start by reviewing the possible causes mentioned above.
- Visually examine the intake manifold runner control (IMRC) wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Replace any damaged wiring or connectors as necessary.
- Reset the engine control module (ECM) to clear the fault code.
- Test drive the vehicle to ensure the code does not return.
- If the code persists, consider replacing the IMRC actuator or performing a software update on the ECM.
Cost Of Fixing Dodge p2015 Fault Code
The repair for Dodge P2015 may involve replacing the intake manifold runner control.
The cost to diagnose and fix the Dodge OBD code P2015 typically ranges from $75 to $150 for labor rates per hour.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.
Details of the Dodge p2015 OBD Code
Dodge P2015 code indicates a problem with the intake manifold runner control circuit.
Dodge OBD code P2015 means that the intake manifold runner position sensor/switch circuit range/performance problem has been detected.
This code is triggered by the Engine Control Module (ECM) when it detects that the intake manifold runner position sensor/switch signal is not within the expected range.
The intake manifold runner position sensor/switch is involved in controlling the intake manifold runner flaps, which help optimize engine performance at different RPM ranges.
Mechanic’s Tech Notes
Detailed information on Dodge fault code P2015, including symptoms, causes, and repair procedures.
To diagnose and fix OBDII code P2015 on a Dodge, start by visually inspecting the wiring harness and connectors related to the intake manifold runner control circuit.
Look for any damage or corrosion on the components and connector pins.
Use a voltmeter to check for proper voltage levels at the control module.
Additionally, scan the vehicle with a diagnostic tool to monitor the intake manifold runner control system’s operation.
If necessary, reflash the control module to address any software issues.
By following these steps, you can pinpoint the root cause of the P2015 trouble code and proceed with the appropriate repair.
FAQ
Common causes of OBD code P2015 in a Dodge vehicle include a faulty Intake Manifold Runner Position Sensor/Switch, wiring issues, or mechanical problems with IMRC hardware.
Diagnose and fix OBD code P2015 in your Dodge by checking intake manifold runner position sensor/switch, wiring harness, connectors for damage, and inspecting for poor connections.
It is not safe to continue driving with OBD code P2015 in a Dodge vehicle. Check intake manifold runner position sensor/switch and related components.
Wrap Up
If your Dodge is displaying OBD code P2015 and experiencing rough idling, poor acceleration, or stalling, it may be caused by a faulty intake manifold runner control sensor or a problem in the intake manifold runner control circuit.
Issues with the sensor, wiring, or the intake manifold itself can trigger this code.
To address Dodge OBD code P2015, start by inspecting the intake manifold runner control sensor and its wiring harness for any visible damage or loose connections.
Test the sensor’s functionality and check the circuit for any shorts or open circuits.
Replace the sensor if necessary and repair any
