[SOLVED] Dodge P200B Code: Fast Fix For Intake Manifold Runner

The OBD code P200B for Dodge indicates an issue with the intake manifold runner control system.

Symptoms include the Engine Light being ON.

This code is commonly caused by intake manifold runner binding or sticking, faulty manifold flow valve, open or shorted harness, or poor electrical connection.

It is important to address this issue promptly to prevent further damage.

A possible fix involves inspecting the wiring harness, connectors, and components for any damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge p200b OBD Code

The Dodge P200B fault code typically triggers when there is an issue with the intake manifold runner control.

Symptoms: Engine Light ON.
Reduced engine power.
Rough idle.
Loss of acceleration.
Increased fuel consumption.

Causes of the Dodge p200b OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge fault code P200B include issues with the intake manifold runner control system.

P200B can be caused by intake manifold runner binding or sticking.
Faulty manifold flow valve.
Manifold flow valve harness is open or shorted.
Manifold flow valve circuit poor electrical connection.

Fixing Dodge Error Code p200b Step By Step

Address the issue by inspecting the intake manifold runner control (IMRC) system for Dodge code P200B.

To fix the Dodge OBDII code P200B, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Check the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring, consider cleaning the throttle body and intake system.
Perform a throttle body relearn procedure using a scan tool.
Reset the engine control module (ECM) to clear the code.
If the problem persists, consider replacing the throttle body assembly.

Cost Of Fixing Dodge p200b Fault Code

The repair for Dodge code P200B typically involves replacing the intake manifold runner control.

The cost to diagnose and fix a Dodge OBD code P200B typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

The total cost depends on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p200b OBD Code

Dodge P200B code indicates a problem with the intake manifold runner control circuit.

Dodge OBD code P200B means that the intake manifold runner performance is stuck closed on bank 2. This code is triggered by the Engine Control Module (ECM) based on feedback from the intake manifold runner control (IMRC) system.

The IMRC system controls the intake manifold runner flaps to optimize airflow into the engine for better performance and efficiency.

When the system detects that the intake manifold runner is stuck closed on bank 2, it sets the P200B trouble code.

Mechanic’s Tech Notes

For Dodge code P200B, check for intake manifold runner performance issues using a scan tool.

To diagnose and fix OBDII code P200B in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve issues related to code P200B.

FAQ

1. What are the common symptoms associated with OBD code P200B in a Dodge vehicle?

Common symptoms of OBD code P200B in a Dodge vehicle include Engine Light ON. Causes may be intake manifold runner binding, faulty manifold flow valve, or related electrical issues. Fix: Inspect wiring and connectors for damage.

2. What is the typical cause of OBD code P200B in a Dodge vehicle?

OBD code P200B in a Dodge is typically caused by intake manifold runner binding, faulty manifold flow valve, or issues with the manifold flow valve circuit.

3. How can I diagnose and fix OBD code P200B in my Dodge vehicle?

Diagnose P200B in Dodge: Symptoms Engine Light ON. Causes Intake Manifold Runner issues. Fix Inspect wiring, connectors, and components for damage or corrosion.

Wrap Up

If your Dodge is displaying OBD code P200B and experiencing issues with the diesel particulate filter (DPF) system, it could be caused by a faulty DPF pressure sensor, clogged DPF filter, wiring problems, or a malfunctioning DPF regeneration system.

To address Dodge OBD code P200B, check the DPF pressure sensor for proper operation, inspect the wiring harness for any damage or loose connections, ensure the DPF filter is not clogged, and verify the functionality of the DPF regeneration system components like the diesel oxidation catalyst (DOC) and selective catalytic