The OBD code P1C70 for Dodge indicates an issue with the Diesel Exhaust Fluid (DEF) system.
Symptoms include the Engine Light being ON.
This code is commonly triggered by an empty DEF tank or tampering with the DEF system.
It is crucial to address promptly to prevent emissionsrelated problems.
A possible fix is to visually inspect the wiring harness, connectors, and components for any damage or corrosion.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Dodge p1c70 OBD Code
The Dodge fault code P1C70 indicates an issue with the steering angle sensor.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of communication with the steering angle sensor module.
- Steering wheel may feel heavier than usual.
- Steering wheel angle sensor fault may be present.
- Steering wheel may not return to center position properly.
Causes of the Dodge p1c70 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Dodge fault code P1C70 include issues with the steering angle sensor.
- P1C70 can be caused by a Diesel Exhaust Fluid Tank Empty.
- Tampering with Diesel Exhaust Fluid System.
Fixing Dodge Error Code p1c70 Step By Step
Address the issue by inspecting the steering angle sensor and related wiring for faults or damage.
- To fix the Dodge OBDII code P1C70, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the ABS module for proper operation and communication.
- Reset the ABS module if necessary.
- Consider replacing the ABS module if all other steps do not resolve the issue.
Cost Of Fixing Dodge p1c70 Fault Code
Diagnosing and repairing Dodge fault code P1C70 may involve replacing the ABS hydraulic pump motor.
The cost to diagnose and fix the Dodge OBD code P1C70 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.
Details of the Dodge p1c70 OBD Code
Dodge fault code P1C70 relates to the steering angle sensor calibration.
Dodge OBD code P1C70 indicates an issue with the Hybrid/EV Battery Pack State Of Charge Performance.
This code is triggered by the Powertrain Control Module (PCM) based on data received from the Battery Energy Control Module (BECM) regarding the state of charge of the hybrid or electric vehicle battery pack.
It signifies that there may be a problem with the battery pack’s ability to hold or deliver the expected amount of electrical energy, affecting the vehicle’s overall performance and efficiency.
Mechanic’s Tech Notes
This section provides detailed information on diagnosing and repairing Dodge fault code P1C70.
To diagnose and fix OBDII code Dodge P1C70, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the P1C70 fault code.
FAQ
OBD code P1C70 in a Dodge indicates an empty Diesel Exhaust Fluid tank or tampering with the system. Check wiring, connectors, and components for damage.
To diagnose OBD code P1C70 in a Dodge, check for an Engine Light ON. Possible causes are an empty Diesel Exhaust Fluid tank or tampering with the system.
Common fix for OBD code P1C70 in a Dodge: Check Diesel Exhaust Fluid tank level, inspect system for tampering, and visually examine wiring harness and connectors for damage.

Wrap Up
If your Dodge is displaying OBD code P1C70, you may experience issues with the transmission control module communication circuit.
This could be caused by faulty sensors, damaged wiring, or poor connections within the transmission control module system.
To address Dodge OBD code P1C70, start by inspecting the wiring harness for any visible damage or corrosion.
Test the connectors for proper connectivity and ensure they are securely attached.
Consider replacing any sensors related to the transmission control module if necessary to resolve the communication circuit problem effectively.
Resources
- Dodge P0a01
- Dodge P1298
- Dodge P0573
- Dodge P0934
- Dodge B2736
- Dodge C102b
- Dodge P0613
- Dodge P1481
- Dodge C123a
- Dodge P0041
- Dodge B1e4d
- Dodge P1189
- Dodge P1252
- Dodge P1508
- Dodge B1f05
- Dodge B2313
- Dodge P0900
- Dodge P04a2
- Dodge P0806
- Dodge P0152
- Dodge P02e6
- Dodge P1074
- Dodge B2224
- Dodge P047b
- Dodge B23c7
- Dodge P0412
- Dodge C101f
- Dodge P0712
- Dodge P0504
- Dodge P0894