[SOLVED] Dodge P1776 Code: Quick Fix For Lr Solenoid Switch Valve

The OBD code P1776 for Dodge indicates an issue with the Solenoid Switch Valve in the transmission’s valve body.

Symptoms include the Engine Light being ON.

The cause could be a faulty Solenoid Switch Valve, open/shorted harness, or poor electrical connection.

It’s a moderate issue that can affect transmission performance.

To fix, inspect and repair any damaged wiring or connectors related to the Solenoid Switch Valve.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p1776 OBD Code

The Dodge fault code P1776 typically indicates issues with the solenoid switch valve latched in the low/reverse position.

Symptoms: Engine Light ON.
Transmission may not shift properly.
Vehicle may go into limp mode where it stays in one gear.
Jerking or harsh shifting during acceleration.

Causes of the Dodge p1776 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P1776 in Dodge vehicles typically indicates a solenoid switch valve latched in the low/reverse position.

P1776 can be caused by a faulty Solenoid Switch Valve.
A Solenoid Switch Valve harness that is open or shorted.
A Solenoid Switch Valve circuit with a poor electrical connection.

Fixing Dodge Error Code p1776 Step By Step

Addressing Dodge fault code P1776 involves inspecting the solenoid switch valve latched in the low/reverse position.

To fix the Dodge OBDII code P1776, first, review the possible causes related to the transmission control solenoid assembly.
Visually inspect the wiring harness and connectors for any damage or corrosion.
Check the connector pins for any signs of being broken, bent, or pushed out.
If no issues are found with the wiring, consider replacing the transmission control solenoid assembly.
After replacing the solenoid assembly, clear the fault codes and test drive the vehicle to ensure the issue has been resolved.

Cost Of Fixing Dodge p1776 Fault Code

Repairing Dodge fault code P1776 typically involves replacing the solenoid switch valve in the transmission.

The cost to diagnose and fix a Dodge OBD code P1776 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.

Details of the Dodge p1776 OBD Code

Dodge fault code P1776 relates to solenoid switch valve latched in low/reverse position.

Dodge OBD code P1776 means the solenoid switch valve latched in the low/reverse position.

This code is triggered by the transmission control module (TCM) when it detects that the solenoid switch valve is stuck or not functioning properly in the low/reverse position.

This issue is related to the transmission system, specifically the solenoid switch valve that controls the flow of transmission fluid to engage the low/reverse gear.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P1776, related to solenoid switch valve latched in the low/reverse position.

To diagnose and fix OBDII code P1776 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Additionally, visually inspect the wiring harness and connectors for any damage.

Check connector pins for signs of being broken, bent, pushed out, or corroded.

Address any issues found during the inspection to resolve the P1776 fault code.

FAQ

1. What are the common symptoms associated with OBD code P1776 in a Dodge vehicle?

Common symptoms of OBD code P1776 in a Dodge vehicle include Engine Light ON. The cause is often a faulty Solenoid Switch Valve. Fix: Inspect wiring and connectors for issues.

2. What are the possible causes of OBD code P1776 in a Dodge vehicle?

Possible causes of OBD code P1776 in a Dodge vehicle include a faulty Solenoid Switch Valve, open/shorted harness, or poor electrical connection. Inspect and repair as needed.

3. How can I diagnose and fix OBD code P1776 in my Dodge vehicle?

Diagnose and fix OBD code P1776 in a Dodge: Symptoms Engine Light ON; Causes Faulty Solenoid Switch Valve, harness issues; Fix Inspect wiring, connectors for damage.

Wrap Up

If your Dodge is displaying OBD code P1776 and experiencing shifting issues, it may be caused by a faulty solenoid switch valve latched in the low/reverse position.

This can lead to poor transmission performance, harsh shifting, or even transmission slippage.

To address Dodge OBD code P1776, check the wiring harness for any damage or corrosion, inspect the solenoid switch valve for proper operation, and test the transmission control module for any faults.

Replacing the solenoid switch valve or repairing any wiring issues may resolve the problem.