[SOLVED] Dodge P1762 Code: Governor Pressure Sensor Voltage Fix Fast

The OBD code P1762 for Dodge indicates a problem with the Governor Pressure Sensor in the transmission system.

Symptoms include the Engine Light being ON.

This issue is usually caused by internal transmission failure or faults in the sensor or its wiring.

It is a serious problem that can lead to transmission issues.

To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p1762 OBD Code

The vehicle may experience delayed or harsh shifting with Dodge fault code P1762.

Symptoms: Engine Light ON.
Possible harsh shifting from the transmission.
Delayed engagement when shifting gears.
Difficulty shifting between gears.

Causes of the Dodge p1762 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Dodge fault code P1762 include low transmission fluid, faulty transmission solenoid, or wiring issues.

P1762 can be caused by internal transmission failure.
A faulty Governor Pressure Sensor.
Governor Pressure Sensor harness open or shorted.
Governor Pressure Sensor circuit poor electrical connection.

Fixing Dodge Error Code p1762 Step By Step

Address the issue by inspecting the transmission solenoid and wiring for potential faults or damage.

To fix the Dodge OBDII code P1762, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the transmission solenoid.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring and connectors, proceed to test the transmission solenoid for proper operation.
Replace the transmission solenoid if it is faulty.
Clear the fault code from the vehicle’s computer using a scan tool.
Test drive the vehicle to ensure the code does not return.

Cost Of Fixing Dodge p1762 Fault Code

The repair for Dodge fault code P1762 typically involves replacing the transmission solenoid switch valve.

The cost to diagnose and fix the Dodge OBD code P1762 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

Costs depend on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.

Details of the Dodge p1762 OBD Code

Dodge fault code P1762 relates to the transmission’s overdrive pressure switch performance.

Dodge OBD code P1762 means the transmission system has detected an excessive torque converter clutch (TCC) slip condition.

This code is triggered by the Powertrain Control Module (PCM) when it detects that the actual TCC slip speed is greater than the desired slip speed by a certain threshold.

The TCC is a component in the automatic transmission that locks the torque converter to the engine under certain conditions to improve fuel efficiency and reduce heat buildup in the transmission fluid.

When excessive slip is detected, it can lead to poor fuel economy, overheating, and potential transmission damage.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P1762, which relates to the transmission pressure control solenoid performance.

To diagnose and fix OBDII code P1762 on a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve issues related to the P1762 fault code.

FAQ

1. What are the common symptoms associated with OBD code P1762 in a Dodge vehicle?

Common symptoms of OBD code P1762 in a Dodge vehicle include Engine Light ON, caused by internal transmission failure, faulty Governor Pressure Sensor, or related wiring issues.

2. What is the typical cause of OBD code P1762 in Dodge vehicles?

OBD code P1762 in Dodge vehicles is typically caused by internal transmission failure, faulty Governor Pressure Sensor, or related wiring harness issues.

3. How can I effectively diagnose and repair OBD code P1762 in my Dodge vehicle?

Diagnose and repair OBD code P1762 in a Dodge: Symptoms Engine Light ON. Causes Internal transmission failure, faulty Governor Pressure Sensor. Fix Inspect wiring harness and connectors.

Wrap Up

If your Dodge is displaying OBD code P1762 along with transmission shifting issues or slipping, it could be caused by a faulty transmission pressure sensor/switch, low transmission fluid level, or a damaged wiring harness in the transmission circuit.

To address Dodge OBD code P1762, check the transmission fluid level and condition, inspect the wiring harness for any visible damage, test the transmission pressure sensor/switch for proper operation, and ensure all connectors are securely attached.

Replace any faulty components as needed.