[SOLVED] Dodge P1755 Code: Fast Fix For Transmission Throttle Control

The OBD code P1755 for Dodge indicates an issue with the Transmission Throttle Valve Actuator (TTVA).

Symptoms include the Engine Light being ON.

This code is usually caused by a faulty TTVA, open/shorted TTVA harness, poor electrical connection, or a faulty Engine Control Module (ECM).

It is a moderate issue.

To fix it, inspect the wiring harness and connectors for damage or corrosion, and check the connector pins for any issues.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The vehicle may experience harsh shifting or failure to shift gears with Dodge fault code P1755.

  • Symptoms: Engine Light ON.
  • Possible harsh shifting from the transmission.
  • Vehicle may go into limp mode where it stays in one gear.
  • Difficulty shifting gears.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge fault code P1755 include issues with the transmission control module or wiring faults.

  • P1755 can be caused by a faulty Transmission Throttle Valve Actuator (TTVA).
  • A Transmission Throttle Valve Actuator (TTVA) harness that is open or shorted.
  • A Transmission Throttle Valve Actuator (TTVA) circuit with poor electrical connection.
  • A faulty Engine Control Module (ECM).

To address Dodge fault code P1755, inspect and potentially replace the transmission governor pressure sensor.

  • To fix the Dodge OBDII code P1755, first, review the possible causes mentioned above.
  • Visually examine the wiring harness and connectors related to the transmission pressure control solenoid.
  • Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • If no issues are found with the wiring and connectors, consider testing the transmission pressure control solenoid for proper operation.
  • Replace the transmission pressure control solenoid if necessary.
  • Finally, clear the fault code and test drive the vehicle to ensure the issue has been resolved.

The repair for Dodge fault code P1755 typically involves replacing the transmission governor pressure sensor.

The cost to diagnose and fix the Dodge OBD code P1755 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, affecting the total cost.

Other factors like shop rates and the complexity of the repair can also influence the final price.

Dodge fault code P1755 relates to the transmission throttle valve position sensor circuit.

Dodge OBD code P1755 indicates a transmission throttle valve position sensor circuit malfunction.

This code is triggered by the Powertrain Control Module (PCM) when it detects an electrical issue in the transmission throttle valve position sensor circuit.

The sensor is responsible for monitoring the position of the throttle valve in the transmission.

When a fault is detected in this circuit, the PCM illuminates the Check Engine Light and stores the P1755 trouble code.

This issue can lead to drivability problems and should be addressed promptly to prevent further damage to the transmission system.

For Dodge code P1755, check for issues with the transmission governor pressure sensor circuit.

To diagnose and fix OBDII code P1755 on a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve the issue causing the P1755 fault code.

1. What does OBD code P1755 mean in a Dodge vehicle?

OBD code P1755 in a Dodge indicates an issue with the Transmission Throttle Valve Actuator (TTVA) circuit. Check TTVA, wiring, and connectors for faults.

2. What are the common symptoms associated with code P1755 in a Dodge vehicle?

Common symptoms of code P1755 in a Dodge vehicle include the Engine Light ON and possible issues with the Transmission Throttle Valve Actuator (TTVA) or Engine Control Module (ECM).

3. How can I diagnose and fix OBD code P1755 in my Dodge vehicle?

Diagnose and fix OBD code P1755 in your Dodge by checking TTVA, harness, and ECM. Inspect wiring for damage or poor connections.

Dodge p1755 error fault code explained

If your Dodge is displaying OBD code P1755, you may experience harsh shifting, transmission slippage, or the transmission may not shift at all.

This code typically indicates a malfunction in the transmission throttle valve position sensor or its circuit.

Possible causes include sensor failure, wiring issues, or a poor connection.

To address Dodge OBD code P1755, start by inspecting the throttle valve position sensor and its wiring harness for any visible damage or corrosion.

Test the sensor’s resistance and ensure proper voltage supply and ground connections.

Replace the sensor if necessary and repair any damaged wiring or connectors to

Scroll to Top