[SOLVED] Dodge P1753 Code: Fast Fix For Transmission Throttle Valve

The OBD code P1753 for Dodge indicates an issue with the Transmission Throttle Valve.

Symptoms include the Engine Light being ON.

This code is usually caused by a faulty Transmission Throttle Valve, open or shorted harness, or poor electrical connection.

It is a moderate issue.

To fix it, inspect the wiring harness and connectors for damage or corrosion, and check connector pins for any signs of damage.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

The Dodge P1753 fault code typically triggers transmission shifting issues in the vehicle.

  • Symptoms: Engine Light ON.
  • Transmission may shift harshly.
  • Vehicle may go into limp mode where it stays in one gear.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge fault code P1753 include faulty transmission control module or wiring issues.

  • P1753 can be caused by a faulty Transmission Throttle Valve.
  • A Transmission Throttle Valve harness that is open or shorted.
  • A Transmission Throttle Valve circuit with poor electrical connection.

Address the issue by inspecting the transmission control module and related wiring for potential faults.

  • To fix Dodge OBDII code P1753, start by reviewing the possible causes mentioned above.
  • Visually examine the wiring harness and connectors related to the transmission control module (TCM).
  • Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • Test the voltage supply to the TCM to ensure it is within specifications.
  • If the wiring and connectors are in good condition and the voltage is correct, consider reprogramming or replacing the TCM as necessary.

Diagnosing and repairing Dodge fault code P1753 may involve replacing the transmission governor pressure sensor.

The cost to diagnose and fix the Dodge OBD code P1753 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Dodge fault code P1753 relates to the transmission control pressure sensor circuit.

Dodge OBD code P1753 indicates a problem with the transmission control module (TCM) communication circuit.

This code is triggered when the TCM detects an improper voltage level on the communication circuit.

The TCM uses this circuit to communicate with other modules in the vehicle, such as the engine control module (ECM) and the body control module (BCM).

When the voltage level deviates from the expected range, the TCM sets code P1753 to indicate a communication issue.

For Dodge code P1753, check for issues with the transmission control relay circuit.

To diagnose and fix OBDII code P1753 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Additionally, visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection can help identify and address the root cause of the P1753 fault code.

1. What are the common symptoms associated with OBD code P1753 in a Dodge vehicle?

Common symptoms of OBD code P1753 in a Dodge vehicle include Engine Light ON, caused by issues with the Transmission Throttle Valve and related electrical connections.

2. What is the typical root cause of OBD code P1753 in Dodge vehicles?

The typical root cause of OBD code P1753 in Dodge vehicles is a faulty transmission throttle valve or issues with the transmission throttle valve circuit.

3. How can I effectively diagnose and repair OBD code P1753 in my Dodge vehicle?

Diagnose and repair OBD code P1753 in Dodge: Symptoms Engine Light ON. Causes Faulty Transmission Throttle Valve, harness issues. Fix Inspect wiring, connectors for damage or corrosion.

Dodge p1753 error fault code explained

If your Dodge is displaying OBD code P1753, you may experience harsh shifting, transmission slippage, or the transmission may not engage properly.

This code typically indicates an issue with the transmission torque converter clutch solenoid circuit, possibly due to a faulty solenoid, wiring problem, or poor connection.

To address Dodge OBD code P1753, start by inspecting the wiring harness and connectors related to the torque converter clutch solenoid.

Check for any damaged wires, loose connections, or corrosion.

Test the solenoid for proper operation and replace it if necessary.

Ensure

Scroll to Top