[SOLVED] Dodge P1495 Code: Fast Fix For Evap Leak Detection

The OBD code P1495 for Dodge indicates a fault with the Leak Detection Pump (LDP) system.

Symptoms include the Engine Light ON and a fuel odor due to vapor release.

Causes may include a faulty LDP, open/shorted LDP harness, or poor electrical connection.

While not a critical issue, it should be addressed promptly.

A possible fix involves inspecting the wiring harness and connectors for damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge p1495 OBD Code

The vehicle may experience issues with the evaporative emission system due to fault code P1495.

Symptoms: Engine Light ON.
A noticeable fuel odor may result from fuel vapor release.

Causes of the Dodge p1495 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P1495 in Dodge vehicles typically indicates a problem with the leak detection pump solenoid circuit.

P1495 can be caused by a faulty Leak Detection Pump (LDP).
An open or shorted Leak Detection Pump (LDP) harness.
Poor electrical connection to the Leak Detection Pump (LDP).

Fixing Dodge Error Code p1495 Step By Step

To resolve Dodge fault code p1495, inspect the leak detection pump and associated hoses for leaks or damage.

To fix Dodge OBDII code p1495, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the leak detection pump solenoid circuit.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Test the leak detection pump solenoid for proper operation.
Replace the leak detection pump solenoid if it fails the test.
Clear the fault codes and perform a test drive to verify the repair.

Cost Of Fixing Dodge p1495 Fault Code

Diagnosing and repairing Dodge fault code p1495 may involve replacing the leak detection pump solenoid.

The cost to diagnose and fix a Dodge OBD code P1495 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p1495 OBD Code

Dodge fault code P1495 relates to a problem with the leak detection pump solenoid circuit.

Dodge OBD code P1495 means a Leak Detection Pump Solenoid Circuit.

This code is triggered by the Engine Control Module (ECM) when it detects an electrical fault in the circuit related to the Leak Detection Pump (LDP) solenoid.

The LDP is part of the evaporative emissions control system, which helps to monitor and control fuel vapor leaks from the fuel system.

When the ECM detects an issue with the LDP solenoid circuit, it sets code P1495 to indicate a problem with the evaporative emissions system.

Mechanic’s Tech Notes

For Dodge code P1495, check the leak detection pump solenoid for proper operation and wiring integrity.

To diagnose and fix OBDII code P1495 on a Dodge, start by checking the wiring harness and connectors related to the leak detection pump solenoid circuit.

Use a voltmeter to test for proper voltage and continuity.

Inspect the connector pins for any damage, corrosion, or poor connections.

Additionally, scan tools can help monitor the operation of the leak detection pump and solenoid.

If necessary, consider reprogramming the powertrain control module (PCM) to address the issue.

FAQ

1. What are the common symptoms associated with OBD code P1495 in a Dodge vehicle?

Common symptoms of OBD code P1495 in a Dodge vehicle include Engine Light ON, fuel odor, caused by issues with Leak Detection Pump (LDP) system.

2. What is the typical cause of OBD code P1495 in a Dodge vehicle?

Typical cause of OBD code P1495 in a Dodge: Faulty Leak Detection Pump (LDP), LDP harness issues, or poor electrical connection. Inspect and repair wiring and connectors.

3. How can I diagnose and fix OBD code P1495 in my Dodge vehicle?

Diagnose P1495 in Dodge: Check LDP for faults. Inspect harness and connectors for damage. Look for broken, bent, pushed out, or corroded pins.

Wrap Up

If your Dodge is displaying OBD code P1495 and you notice issues with the leak detection pump solenoid circuit, it could be caused by a faulty leak detection pump, damaged wiring, or a poor electrical connection.

To address Dodge OBD code P1495, start by checking the wiring harness and connectors for any signs of damage or corrosion.

Test the leak detection pump solenoid and its circuit for proper operation.

Replace any faulty components and ensure all connections are secure to resolve the issue effectively.