[SOLVED] Dodge P1005 Code: Fast Fix For Manifold Tuning Valve

The OBD code P1005 for Dodge indicates an issue with the Manifold Tuning Valve Control Circuit.

Symptoms include the Engine Light being ON.

This code is typically caused by an open or shorted harness, poor electrical connection, or damaged components.

While not a severe issue, it should be addressed promptly.

To fix it, inspect the wiring harness, connectors, and components for any damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge p1005 OBD Code

The vehicle may experience rough idling or stalling with Dodge fault code P1005.

Symptoms: Engine Light ON.
Rough idle may be experienced.
Loss of power during acceleration.
Engine may stall at times.
Engine may run rough or hesitate during driving.

Causes of the Dodge p1005 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Dodge P1005 code typically indicates a fault related to the manifold absolute pressure sensor circuit.

P1005 can be caused by a faulty manifold tuning valve harness open or shorted.
A poor electrical connection in the manifold tuning valve circuit.

Fixing Dodge Error Code p1005 Step By Step

Address the issue by inspecting and potentially replacing the intake manifold runner control valve.

To fix Dodge OBDII code P1005, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the throttle position sensor.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring and connectors, proceed to test the throttle position sensor itself for proper operation.
Replace the throttle position sensor if it is faulty.
Clear the fault code from the vehicle’s computer using a scan tool.
Perform a test drive to ensure the code does not return.

Cost Of Fixing Dodge p1005 Fault Code

Diagnosing and repairing Dodge P1005 typically involves addressing issues with the manifold tuning valve.

The cost to diagnose and fix a Dodge OBD code P1005 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

The final cost depends on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p1005 OBD Code

Dodge fault code P1005 relates to the manifold tuning valve control circuit.

Dodge OBD code P1005 means the system is detecting a fault with the throttle position sensor circuit.

This code is triggered by the Engine Control Module (ECM) when it detects a discrepancy in the voltage signal coming from the throttle position sensor.

The throttle position sensor is a crucial component that monitors the position of the throttle valve and sends this information to the ECM to adjust airfuel mixture and engine performance accordingly.

If the ECM receives a signal that is out of range or inconsistent with other sensor readings, it will trigger code P1005.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P1005, including symptoms, causes, and solutions for effective troubleshooting.

To diagnose and fix OBDII code P1005 on a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve the issue causing the P1005 fault code.

FAQ

1. What are the common symptoms associated with OBD code P1005 in a Dodge vehicle?

Common symptoms of OBD code P1005 in a Dodge vehicle include the Engine Light ON. Causes may be the manifold tuning valve harness issues. Fix: Inspect and repair wiring connections.

2. What is the typical cause of OBD code P1005 in a Dodge vehicle?

OBD code P1005 in a Dodge is typically caused by an open or shorted manifold tuning valve harness, poor electrical connection. Inspect and repair wiring/connectors.

3. How can I diagnose and repair OBD code P1005 in my Dodge vehicle?

Diagnose and repair OBD code P1005 in Dodge: Symptoms Engine Light ON. Causes Manifold tuning valve harness issues. Fix Inspect wiring harness and connectors for damage or corrosion.

Wrap Up

If your Dodge is displaying OBD code P1005, you may experience rough idling, stalling, or poor acceleration.

This code typically indicates an issue with the intake manifold runner control (IMRC) valve stuck open, a faulty IMRC actuator, or a problem with the IMRC valve control circuit.

To address Dodge OBD code P1005, inspect the IMRC valve and actuator for proper operation, check the wiring harness and connectors for any damage or corrosion, and test the IMRC valve control circuit for continuity and proper voltage levels.

Consider replacing the IMRC valve or