[SOLVED] Dodge P0A24 Code: Fast Fix For Low Generator Torque

The OBD code P0A24 for Dodge indicates an issue with the Generator Torque Sensor.

This affects the hybrid system in the vehicle.

Symptoms include the Engine Light being ON.

The code is usually caused by a faulty sensor, open/shorted sensor harness, or poor electrical connection.

It is a moderate issue that should be addressed.

To fix it, inspect the sensor, harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p0a24 OBD Code

The vehicle may experience issues related to the hybrid battery system with fault code P0A24.

Symptoms: Engine Light ON.
Reduced power or acceleration.
Vehicle may not start.
Engine may stall while driving.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p0a24 OBD Code

The fault code P0A24 on a Dodge typically indicates a problem with the hybrid battery.

P0A24 can be caused by a faulty Generator Torque Sensor.
A Generator Torque Sensor harness that is open or shorted.
A Generator Torque Sensor circuit with a poor electrical connection.

Fixing Dodge Error Code p0a24 Step By Step

Repair involves inspecting and potentially replacing the hybrid battery pack temperature sensor circuit.

To fix the Dodge OBDII code P0A24, review the possible causes related to the code.
Visually examine the wiring harness and connectors associated with the hybrid battery pack.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, perform a reset on the hybrid battery control module.
Test the system to see if the code returns.
If the code persists, consider replacing the hybrid battery control module with a new one.

Cost Of Fixing Dodge p0a24 Fault Code

The repair for Dodge fault code P0A24 may involve replacing the hybrid battery pack.

The cost to diagnose and fix the Dodge OBD code P0A24 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150, excluding parts.

Costs may vary based on shop rates and the complexity of the repair.

Details of the Dodge p0a24 OBD Code

Dodge fault code P0A24 relates to the hybrid battery cooling system performance.

Dodge OBD code P0A24 indicates a fault with the hybrid battery pack voltage sensor circuit.

This code is triggered by the Powertrain Control Module (PCM) when it detects a voltage signal from the hybrid battery pack voltage sensor that is outside of the expected range.

The hybrid battery pack voltage sensor is a component that monitors the voltage level of the hybrid battery pack in hybrid vehicles.

When this sensor malfunctions or sends incorrect voltage readings to the PCM, it triggers the P0A24 fault code.

This code is specific to hybrid vehicles and is related to the hybrid battery system’s monitoring and control.

Mechanic’s Tech Notes

This code indicates a fault with the hybrid battery pack cooling system on Dodge vehicles.

To diagnose and fix OBDII code P0A24 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This can help identify and address any issues causing the fault code.

FAQ

1. What does OBD code P0A24 mean in a Dodge vehicle?

OBD code P0A24 in a Dodge means an issue with the Generator Torque Sensor. Check sensor, harness, and connections for faults.

2. What are the common symptoms associated with OBD code P0A24 in a Dodge vehicle?

Common symptoms for OBD code P0A24 in a Dodge vehicle include Engine Light ON. Causes may be a faulty Generator Torque Sensor or related wiring issues. Fix: Inspect and repair as needed.

3. How can I diagnose and fix OBD code P0A24 in my Dodge vehicle?

Diagnose and fix OBD code P0A24 in your Dodge: Symptoms Engine Light ON; Causes Faulty Generator Torque Sensor, harness issues; Fix Inspect wiring, connectors for damage.

Wrap Up

If your Dodge is displaying OBD code P0A24, you may experience issues with the hybrid battery system, such as a malfunctioning battery temperature sensor, faulty wiring connections, or low coolant levels in the hybrid system.

These issues can lead to poor battery performance and reduced fuel efficiency.

To address Dodge OBD code P0A24, start by inspecting the wiring harness and connectors related to the hybrid battery temperature sensor.

Test the sensor for proper operation and check the coolant levels in the hybrid system.

Replace any damaged sensors or repair faulty wiring connections to ensure optimal performance of the hybrid battery system