[SOLVED] Dodge P0935 Code: Resolve High Hydraulic Pressure Sensor Circuit

The OBD code P0935 for Dodge indicates a fault with the Hydraulic Pressure Sensor Circuit.

Symptoms include the Engine Light being ON.

This code affects the transmission system.

Causes may include a faulty sensor, open/shorted sensor harness, or poor electrical connection.

It is a moderate issue.

To fix, inspect the sensor, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge p0935 OBD Code

The Dodge P0935 fault code typically triggers when there is an issue with the clutch pressure control solenoid.

Symptoms: Service Engine Soon Warning Light ON.
Transmission may not shift properly.
Vehicle may go into limp mode.
Transmission may slip or have harsh shifts.
Vehicle may have difficulty starting.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p0935 OBD Code

P0935 in Dodge indicates an issue with the clutch pressure control solenoid circuit.

P0935 can be caused by a Faulty Hydraulic Pressure Sensor.
An open or shorted Hydraulic Pressure Sensor harness.
A poor electrical connection in the Hydraulic Pressure Sensor circuit.

Fixing Dodge Error Code p0935 Step By Step

Repair the open or short circuit in the clutch actuator circuit for Dodge fault code P0935.

To fix the Dodge OBDII code P0935, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the transmission line pressure sensor circuit.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Test the transmission line pressure sensor for proper operation.
Replace the transmission line pressure sensor if it is found to be faulty.
Clear the fault codes from the vehicle’s computer using a scan tool.
Test drive the vehicle to ensure the issue has been resolved.

Cost Of Fixing Dodge p0935 Fault Code

The repair for Dodge fault code P0935 may involve replacing the clutch pressure control solenoid.

The cost to diagnose and fix the Dodge OBD code P0935 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

The final cost depends on labor rates, shop fees, and the complexity of the repair needed.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p0935 OBD Code

Dodge fault code P0935 relates to a hydraulic pressure sensor circuit malfunction.

Dodge OBD code P0935 means a problem with the line pressure sensor circuit.

This code is triggered by the Powertrain Control Module (PCM) when it detects an electrical fault in the line pressure sensor circuit.

The line pressure sensor is part of the transmission control system and is responsible for monitoring hydraulic pressure in the transmission.

When the PCM detects an issue with the line pressure sensor circuit, it illuminates the Check Engine Light and stores the P0935 trouble code.

Mechanic’s Tech Notes

For Dodge code P0935, check the circuit related to the hydraulic pressure sensor.

To diagnose and fix OBDII code P0935 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection can help identify and address any issues causing the P0935 code.

FAQ

1. What does OBD code P0935 mean in a Dodge vehicle?

OBD code P0935 in a Dodge means an issue with the Hydraulic Pressure Sensor. Check sensor, wiring, and connectors for faults to resolve the problem.

2. What are the common symptoms associated with OBD code P0935 in a Dodge?

Common symptoms of OBD code P0935 in a Dodge include the Engine Light ON. The cause is often a faulty Hydraulic Pressure Sensor. Fix: Inspect sensor and wiring for issues.

3. How can I diagnose and repair OBD code P0935 in my Dodge vehicle?

Diagnose and repair OBD code P0935 in your Dodge by checking the hydraulic pressure sensor, its harness, and connections for faults. Repair as needed.

Wrap Up

If your Dodge is displaying OBD code p0935 and experiencing shifting issues or slipping transmission, it may be caused by a faulty hydraulic pressure sensor, damaged wiring in the transmission circuit, or low transmission fluid level.

To address Dodge OBD code p0935, check the transmission fluid level and condition, inspect the wiring harness for any visible damage, test the hydraulic pressure sensor for proper operation, and ensure all connectors are securely attached.

Consider replacing the sensor if necessary.