[SOLVED] Dodge P0792 Code: Fast Fix For Shaft Speed Sensor Circuit

The OBD code P0792 for Dodge indicates an issue with the Intermediate Shaft Speed Sensor ‘A’.

This affects the transmission system.

Symptoms include the Engine Light being ON.

The cause is usually a faulty sensor, open/shorted harness, or poor electrical connection.

It’s a moderate issue.

To fix, inspect the sensor, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p0792 OBD Code

The vehicle may experience shifting issues or slippage in the transmission with fault code P0792.

Symptoms: Engine Light ON.
Possible harsh shifting from the transmission.
Difficulty shifting gears.
Decreased fuel efficiency.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p0792 OBD Code

Possible reasons for Dodge fault code P0792 include issues with the transmission fluid pressure sensor circuit.

P0792 can be caused by a faulty Intermediate Shaft Speed Sensor ‘A’.
An open or shorted Intermediate Shaft Speed Sensor ‘A’ harness.
A poor electrical connection in the Intermediate Shaft Speed Sensor ‘A’ circuit.

Fixing Dodge Error Code p0792 Step By Step

Addressing Dodge code P0792 involves diagnosing and repairing issues with the transmission sensor 6 circuit low.

To fix the Dodge OBDII code P0792, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the transmission shift solenoid E circuit.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Test the transmission shift solenoid E for proper operation.
Replace the transmission shift solenoid E if it is found to be faulty.
Clear the fault codes from the vehicle’s computer using a scan tool.
Test drive the vehicle to ensure the issue has been resolved.

Cost Of Fixing Dodge p0792 Fault Code

The repair for Dodge fault code P0792 may involve replacing the transmission fluid pressure sensor.

The cost to diagnose and fix Dodge OBD code P0792 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost could be around $75 to $150, depending on shop rates and the complexity of the repair.

Details of the Dodge p0792 OBD Code

Dodge fault code P0792 relates to an issue with the transmission’s intermediate shaft speed sensor circuit.

Dodge OBD code P0792 means an incorrect transmission ratio was detected in gear 2. It’s triggered by the Transmission Control Module (TCM) based on input shaft speed sensor data.

This code indicates a problem with the gear ratio in the transmission’s second gear.

Mechanic’s Tech Notes

Detailed information on diagnosing and repairing Dodge fault code P0792 related to an incorrect transmission downshift.

To diagnose and fix OBDII code P0792 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection can help identify and address potential issues causing the P0792 fault code.

FAQ

1. What are the common symptoms associated with OBD code P0792 in a Dodge vehicle?

Common symptoms of OBD code P0792 in a Dodge vehicle include the Engine Light ON and issues with the Intermediate Shaft Speed Sensor ‘A’.

2. What is the typical cause of OBD code P0792 in a Dodge vehicle?

OBD code P0792 in a Dodge is typically caused by a faulty Intermediate Shaft Speed Sensor ‘A’, open/shorted harness, or poor electrical connection. Inspect and repair as needed.

3. How can I diagnose and repair OBD code P0792 in my Dodge vehicle?

Diagnose and repair OBD code P0792 in your Dodge by checking for a faulty Intermediate Shaft Speed Sensor ‘A’, related harness issues, and inspecting wiring for damage or poor connections.

Wrap Up

If your Dodge is displaying OBD code P0792 and experiencing shifting issues, it could be caused by a faulty transmission intermediate shaft speed sensor, damaged wiring in the transmission harness, or low transmission fluid level.

To address Dodge OBD code P0792, check the transmission intermediate shaft speed sensor for proper operation, inspect the wiring harness for any signs of damage or corrosion, and ensure the transmission fluid level is correct according to manufacturer specifications.