[SOLVED] Dodge P0765 Code: Fast Fix For Underdrive Solenoid Circuit

The OBD code P0765 for Dodge indicates a problem with the Underdrive Solenoid Valve (UD) circuit.

This affects the transmission system.

Symptoms include the Engine Light ON and transmission not shifting gears.

Causes may include low transmission fluid, dirty fluid, faulty UD solenoid valve, or wiring issues.

It is a serious issue that requires attention.

A possible fix is to inspect and repair any damaged wiring or connectors related to the UD solenoid valve circuit.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p0765 OBD Code

The vehicle may experience shifting issues or fail to shift gears with Dodge code P0765.

Symptoms: Engine Light ON.
Transmission will not shift gears.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p0765 OBD Code

Possible reasons for Dodge fault code P0765 include issues with the shift solenoid D electrical circuit.

P0765 can be caused by a low transmission fluid level.
Dirty transmission fluid.
A faulty UD solenoid valve.
An open or shorted UD solenoid valve harness.
A poor electrical connection in the UD solenoid valve circuit.

Fixing Dodge Error Code p0765 Step By Step

Repairing a faulty shift solenoid D circuit can resolve Dodge P0765 code.

To fix the Dodge OBDII code P0765, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the transmission shift solenoid D circuit.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, test the transmission shift solenoid D for proper operation.
Replace the transmission shift solenoid D if it is faulty.
Clear the fault codes and test drive the vehicle to ensure the issue is resolved.

Cost Of Fixing Dodge p0765 Fault Code

The repair for Dodge fault code P0765 typically involves replacing the shift solenoid D circuit.

The cost to diagnose and fix a Dodge OBD code P0765 is typically based on a 1. 0hour repair time.

Labor rates range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and the complexity of the repair can influence the final cost.

Details of the Dodge p0765 OBD Code

Dodge fault code P0765 relates to a problem with the transmission shift solenoid D.

Dodge OBD code P0765 means that the transmission shift solenoid D malfunctioned.

This code is triggered by the Powertrain Control Module (PCM) when it detects an electrical issue with the shift solenoid D circuit.

The shift solenoid D is part of the transmission control system and is responsible for controlling the flow of transmission fluid to engage the appropriate gear.

When this solenoid malfunctions, it can cause shifting issues and potentially lead to transmission problems.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P0765, including symptoms, causes, and repair procedures.

To diagnose and fix OBDII code P0765 in a Dodge, start by checking the transmission control module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough examination can help pinpoint the root cause of the shift solenoid D electrical issue indicated by code P0765.

FAQ

1. What are the common symptoms associated with OBD code P0765 in a Dodge vehicle?

Common symptoms of OBD code P0765 in a Dodge vehicle include Engine Light ON, transmission not shifting gears. Causes may include low fluid, faulty UD solenoid valve. Fix: Check wiring and connectors.

2. What is the typical cause of OBD code P0765 in a Dodge vehicle?

OBD code P0765 in a Dodge is typically caused by issues like low transmission fluid, dirty fluid, faulty UD solenoid valve, or related wiring problems.

3. How can I diagnose and repair OBD code P0765 in my Dodge vehicle?

Diagnose and repair OBD code P0765 in Dodge: Symptoms Engine Light ON, transmission won’t shift. Causes low/dirty fluid, faulty UD solenoid valve. Fix Check wiring, connectors for damage.

Wrap Up

If your Dodge is displaying OBD code P0765, you may experience harsh shifting, transmission slippage, or the transmission may not shift at all.

This code typically indicates a problem with the shift solenoid D circuit, which could be caused by a faulty shift solenoid, damaged wiring, or poor connections.

To address Dodge OBD code P0765, start by inspecting the wiring harness and connectors related to the shift solenoid D.

Check for any signs of damage, corrosion, or loose connections.

Test the shift solenoid D for proper operation and replace it