The OBD code P0457 for Dodge indicates a problem with the Evaporative Emission Control System.
Symptoms include the Engine Light ON, fuel odor, and illuminated Fuel Cap Indicator Lamp.
This is often caused by a damaged, missing, or loose fuel filler cap.
While not a severe issue, it should be addressed promptly.
A possible fix is to inspect the fuel filler cap and corresponding wiring for any damage or loose connections.
Repair Importance Level | 3.33 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Dodge p0457 OBD Code
The Dodge P0457 fault code indicates a leak in the evaporative emission control system.
- Symptoms: Engine Light ON.
- A noticeable fuel odor may result from fuel vapor release.
- Fuel cap indicator lamp (FCIL) may be illuminated.
Causes of the Dodge p0457 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Dodge fault code P0457 include loose gas cap, EVAP system leaks, or faulty purge valve.
- P0457 can be caused by a damaged, missing, or loosely installed fuel filler cap.
- Corroded electrical connectors.
- A faulty fuel tank pressure sensor.
- Low voltage in the EVAP system.
- Or a broken or corroded ground connection.
Fixing Dodge Error Code p0457 Step By Step
To resolve Dodge code P0457, inspect the EVAP system for leaks or faulty components.
- To fix the Dodge OBDII code P0457, start by reviewing the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any damage.
- Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Check the integrity of the fuel cap and ensure it is sealing properly.
- Replace the fuel cap if necessary.
- Perform a smoke test on the EVAP system to check for leaks.
- Inspect the EVAP system hoses and components for any cracks or damage.
- Replace any faulty components as needed.
- Clear the fault code with a scan tool and test drive the vehicle to verify the repair.
Cost Of Fixing Dodge p0457 Fault Code
Diagnosing and repairing Dodge code P0457 typically involves checking the EVAP system for leaks.
The cost to diagnose and fix the Dodge OBD code P0457 is typically based on an estimated repair time of 1. 0 hour, with labor rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any additional parts needed for the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Dodge p0457 OBD Code
Code P0457 on a Dodge indicates a leak in the evaporative emission system.
Dodge OBD code P0457 indicates a leak in the evaporative emission control system.
This code is triggered by the ECM when it detects that the fuel vapor system is not holding pressure as it should.
The system involved in this code is the evaporative emission control system, which is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere.
A common cause of this code is a loose or damaged gas cap, which can allow fuel vapors to escape.
Other potential causes include a leak in the system hoses, a faulty purge valve, or a malfunctioning fuel tank pressure sensor.
Mechanic’s Tech Notes
For Dodge code P0457, check for a loose gas cap or a faulty EVAP system component.
To diagnose and fix OBDII code P0457 on a Dodge, start by visually inspecting the EVAP system for any obvious signs of damage or leaks.
Use a scan tool to monitor the EVAP system pressure sensor readings and ensure they are within specifications.
Check the integrity of the EVAP system hoses, especially around the purge valve and charcoal canister.
Use a voltmeter to test the purge valve for proper operation and check for any voltage irregularities.
Inspect the EVAP system for loose or damaged wiring connections.
Clear the code after repairs and perform a drive cycle to ensure the issue is resolved.
FAQ
Common causes of OBD code P0457 in a Dodge vehicle include a damaged, missing, or loosely installed fuel filler cap. Visually inspect wiring harness and connectors for damage.
Diagnose P0457 in Dodge: Check fuel filler cap, wiring, connectors for damage. Fix: Inspect components, connector pins for damage, corrosion. Review and address possible causes.
It is not safe to continue driving with OBD code P0457 in your Dodge. Check and secure the fuel filler cap and inspect related wiring for issues.

Wrap Up
If your Dodge is displaying OBD code P0457 and you notice a loose gas cap, fuel odor, or increased fuel consumption, it may be caused by a loose or damaged gas cap, a leak in the evaporative emission control system, or a faulty fuel tank pressure sensor.
To address Dodge OBD code P0457, start by checking the gas cap for proper sealing and tightening.
Inspect the EVAP system for leaks, test the fuel tank pressure sensor, and examine the wiring harness and connectors for any damage or corrosion.
Resources
- Dodge B2185
- Dodge B1e4a
- Dodge P0152
- Dodge B2337
- Dodge C0077
- Dodge B1e4d
- Dodge P0298
- Dodge B2315
- Dodge C101c
- Dodge C1042
- Dodge P0038
- Dodge B2113
- Dodge C2203
- Dodge P0041
- Dodge B2854
- Dodge B219a
- Dodge B23b8
- Dodge B2505
- Dodge P041a
- Dodge B259c
- Dodge C050d
- Dodge B2734
- Dodge B287e
- Dodge B2318
- Dodge C1090
- Dodge B220b
- Dodge B220a
- Dodge P0101
- Dodge P0432
- Dodge P0473