[SOLVED] Dodge P0415 Code: Fast Fix For Air Injection Valve Circuit

The OBD code P0415 for Dodge indicates a fault with the secondary air injection system.

Symptoms include the Engine Light ON, engine hesitation.

The issue is commonly caused by a faulty air pump, open/shorted harness, or poor electrical connection.

While not a critical issue, it can affect emissions.

To fix, inspect wiring and connectors for damage, and check connector pins for any issues.

Repair Importance Level	6.67 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	6.67 (Out of 10)

Symptoms of the Dodge p0415 OBD Code

The Dodge P0415 fault code typically triggers the check engine light due to secondary air injection system issues.

Symptoms: Engine Light ON.
Engine hesitation.

Causes of the Dodge p0415 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Dodge fault code P0415 include issues with the secondary air injection system.

P0415 can be caused by a faulty Air Pump inoperative.
An open or shorted Air bypass solenoid harness.
A poor electrical connection in the Air bypass solenoid circuit.

Fixing Dodge Error Code p0415 Step By Step

Address the secondary air injection system circuit malfunction by checking wiring and components for faults.

To fix Dodge OBDII code P0415, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the secondary air injection system.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, proceed to test the secondary air injection pump for proper operation.
Replace the secondary air injection pump if it is faulty.
Clear the fault code from the vehicle’s computer using a scan tool.
Finally, perform a test drive to ensure the code does not return, indicating a successful repair.

Cost Of Fixing Dodge p0415 Fault Code

Diagnosing and repairing fault code P0415 on a Dodge may involve testing and replacing components.

The cost to diagnose and fix Dodge OBD code P0415 is typically based on 1. 0 hour of labor, with rates ranging from $75 to $150 per hour.

The total cost will depend on shop rates, complexity of the issue, and any additional parts needed for the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p0415 OBD Code

Dodge fault code P0415 relates to a secondary air injection system malfunction.

Dodge OBD code P0415 means Secondary Air Injection System Switching Valve A Circuit Malfunction.

This code is triggered when the ECM detects a problem with the electrical circuit of the secondary air injection system switching valve A.

The secondary air injection system is responsible for reducing emissions by injecting fresh air into the exhaust system to help burn off any remaining fuel.

In this case, the ECM monitors the circuit that controls the switching valve A to ensure it is functioning properly.

If a malfunction is detected in this circuit, the P0415 trouble code is set.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P0415, including symptoms, causes, and diagnostic procedures.

To diagnose and fix OBDII code P0415 in a Dodge, start by visually inspecting the wiring harness and connectors related to the secondary air injection system.

Look for any damage or corrosion.

Use a voltmeter to check for proper voltage at the secondary air injection relay control circuit.

Test the relay operation using a scan tool to command it on and off.

If the relay is functioning correctly, check the wiring between the relay and the powertrain control module (PCM) for any faults.

Repair any issues found during the inspection to resolve the P0415 fault code.

FAQ

1. What are the common symptoms associated with OBD code P0415 in a Dodge vehicle?

Common symptoms of OBD code P0415 in a Dodge vehicle include Engine Light ON, engine hesitation. Causes may be faulty air pump, solenoid issues. Fix: Inspect wiring and connectors for damage.

2. What is the typical cause of OBD code P0415 in a Dodge vehicle?

OBD code P0415 in a Dodge is typically caused by a faulty air pump, open/shorted harness, or poor electrical connection. Inspect and repair as needed.

3. How can I diagnose and repair OBD code P0415 in my Dodge vehicle?

Diagnose P0415 in Dodge: Symptoms Engine Light ON, Engine hesitation. Causes Faulty Air Pump, open/shorted harness, poor connection. Fix Inspect wiring, connectors for damage.

Wrap Up

If your Dodge is displaying OBD code P0415, you may experience rough idling, poor engine performance, or increased emissions.

This code typically indicates a fault in the secondary air injection system, possibly caused by a faulty air pump, damaged wiring, or a failed air pump relay.

To address Dodge OBD code P0415, start by checking the air pump operation, inspecting the wiring harness for any visible damage, and testing the air pump relay for proper functionality.

Replace any faulty components and ensure all connections are secure to resolve the issue effectively.