[SOLVED] Dodge P0369 Code: Fast Fix For Camshaft Sensor Issue

The OBD code P0369 for Dodge indicates a problem with the Camshaft Position Sensor B Circuit Intermittent Bank 1. This affects the camshaft position sensor in the engine.

Symptoms include the engine light being on, lack of power, and engine stalling.

Causes can range from low engine oil to a faulty sensor or wiring issues.

It is a moderate issue that should be addressed promptly.

A possible fix involves checking and repairing any damaged components or wiring connections related to the camshaft position sensor.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	6.67 (Out of 10)

Symptoms of the Dodge p0369 OBD Code

The engine may run rough or misfire intermittently with Dodge fault code P0369.

With OBD code P0369 on a Dodge, symptoms may include: Engine Light ON.
Lack/Loss of Power.
Engine Stall.

Causes of the Dodge p0369 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge fault code P0369 include faulty camshaft position sensor or wiring issues.

P0369 can be caused by low engine oil.
A faulty Camshaft Position (CMP) Sensor.
Camshaft Position Sensor harness is open or shorted.
Camshaft Position Sensor circuit poor electrical connection.
A faulty Powertrain Control Module (PCM).
Camshaft Tone Wheel loose/damaged or misaligned.
A dead (weak) battery.

Fixing Dodge Error Code p0369 Step By Step

Replace the camshaft position sensor on the Dodge vehicle to address fault code P0369.

To fix Dodge OBDII code P0369, start by reviewing the possible causes mentioned above.
Visually examine the camshaft position sensor wiring harness and connectors for any damage.
Check the connector pins for signs of being broken, bent, pushed out, or corroded.
Replace the camshaft position sensor if any issues are found during inspection.
Clear the fault codes and perform a test drive to verify that the issue has been resolved.

Cost Of Fixing Dodge p0369 Fault Code

The repair for Dodge fault code P0369 may involve replacing the camshaft position sensor.

The cost to diagnose and fix the Dodge OBD code P0369 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and the complexity of the repair can affect the final cost.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p0369 OBD Code

Dodge fault code P0369 relates to an issue with the camshaft position sensor B circuit.

Dodge OBD code P0369 means that a camshaft position sensor B circuit intermittent signal is detected by the Engine Control Module (ECM).

This code is triggered when the ECM receives intermittent signals from the camshaft position sensor B, indicating a problem with the sensor or its circuit.

The camshaft position sensor B is responsible for providing the ECM with information about the camshaft’s position in relation to the crankshaft.

This information is crucial for proper fuel injection timing and ignition system operation.

When the ECM detects inconsistent signals from the camshaft position sensor B, it triggers the P0369 fault code.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P0369, including symptoms, causes, and diagnostic steps for resolution.

To diagnose and fix OBDII code P0369 in a Dodge, start by checking the camshaft position sensor’s wiring harness and connectors for any damage or corrosion.

Use a voltmeter to test the sensor’s voltage and ground connections.

Ensure the sensor is receiving proper voltage.

Scan tools can help verify sensor data and check for any communication issues over the CAN network.

If no visible issues are found, consider replacing the camshaft position sensor itself.

Reflashing the engine control module may also be necessary to resolve the fault code.

FAQ

1. What are the common symptoms associated with OBD code P0369 in a Dodge vehicle?

Common symptoms of OBD code P0369 in a Dodge vehicle include Engine Light ON, lack of power, engine stall. Causes may include faulty CMP sensor, loose camshaft tone wheel. Fix: Inspect wiring and connectors for damage.

2. What is the typical cause of OBD code P0369 in a Dodge vehicle?

The typical cause of OBD code P0369 in a Dodge vehicle is a faulty Camshaft Position (CMP) Sensor or issues with the sensor circuit or connections.

3. How can I diagnose and repair OBD code P0369 in my Dodge vehicle?

Diagnose and repair OBD code P0369 in your Dodge by checking for low engine oil, faulty CMP sensor, wiring issues, loose camshaft tone wheel, or PCM problems.

Wrap Up

If your Dodge is displaying OBD code P0369 and experiencing rough idling, stalling, or poor acceleration, it may be caused by a faulty camshaft position sensor B, a wiring issue in the camshaft position sensor circuit, or a problem with the camshaft phaser.

To address Dodge OBD code P0369, start by inspecting the wiring harness and connectors related to the camshaft position sensor B.

Test the sensor’s functionality and replace it if necessary.

Ensure proper alignment and operation of the camshaft phaser for optimal engine performance.