[SOLVED] Dodge P0344 Code: Fast Fix For Camshaft Position Sensor

The OBD code P0344 for Dodge indicates a problem with the Camshaft Position Sensor Circuit A Intermittent Bank 1 or Single Sensor.

Symptoms include the Engine Light ON, lack of power, and engine stalling.

Causes may include low engine oil, a faulty CMP sensor, wiring issues, or a problematic PCM.

This issue should be addressed promptly to prevent further engine damage.

A possible fix involves inspecting and repairing any damaged components or wiring connections related to the camshaft position sensor.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	6.67 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p0344 OBD Code

The vehicle may experience intermittent stalling or rough idling with Dodge code P0344.

With Dodge OBD code P0344, the Engine Light will be ON.
Lack/Loss of Power may be experienced.
Engine Stall can occur.

Causes of the Dodge p0344 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Dodge fault code p0344 include camshaft position sensor issues or wiring problems.

P0344 can be caused by low engine oil.
A faulty Camshaft Position (CMP) Sensor.
Camshaft Position Sensor harness is open or shorted.
Camshaft Position Sensor circuit poor electrical connection.
A faulty Powertrain Control Module (PCM).
Camshaft Tone Wheel loose/damaged or misaligned.
Or a dead (weak) battery.

Fixing Dodge Error Code p0344 Step By Step

Replace the camshaft position sensor on the Dodge vehicle to address fault code P0344.

To fix a Dodge OBDII code P0344, start by reviewing the possible causes mentioned above.
Visually examine the camshaft position sensor wiring harness and connectors for any damage.
Check the connector pins for signs of being broken, bent, pushed out, or corroded.
If any issues are found, repair or replace the damaged components.
Clear the fault code from the vehicle’s computer using a scan tool.
Start the engine and monitor the camshaft position sensor data to ensure the code does not return.
If the code persists, consider replacing the camshaft position sensor itself.

Cost Of Fixing Dodge p0344 Fault Code

The repair for Dodge fault code P0344 typically involves replacing the camshaft position sensor.

The cost to diagnose and fix a Dodge OBD code P0344 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.

Details of the Dodge p0344 OBD Code

Dodge fault code P0344 relates to a camshaft position sensor signal intermittent issue.

Dodge OBD code P0344 means that a problem has been detected in the camshaft position sensor circuit for engine bank 1. This code is triggered by the Engine Control Module (ECM) when it detects that the camshaft position sensor signal is intermittent or has a fault.

The camshaft position sensor is responsible for monitoring the position of the camshaft in relation to the crankshaft.

This information is crucial for the ECM to determine the correct fuel injection timing and ignition timing.

When the ECM detects an issue with the camshaft position sensor signal, it triggers code P0344, indicating a problem with the sensor itself, the wiring connecting the sensor to the ECM, or the ECM’s ability to interpret the sensor signal accurately.

Mechanic’s Tech Notes

For Dodge code P0344, check camshaft position sensor circuit for intermittent signal issues.

To diagnose and fix OBDII code P0344 on a Dodge, start by checking the camshaft position sensor’s wiring harness and connectors for any damage or corrosion.

Use a voltmeter to test the sensor’s power and ground connections.

Verify the sensor’s signal using a scan tool capable of reading live data.

If the sensor is receiving power and ground but not sending a signal, it may need replacement.

Additionally, ensure the camshaft and crankshaft sensors are synchronized correctly.

Reflash the engine control module if necessary.

FAQ

1. What are the symptoms of a P0344 fault code in a Dodge vehicle?

Symptoms of P0344 in a Dodge: Engine Light ON, lack of power, engine stall. Causes: Low oil, faulty CMP sensor, wiring issues. Fix: Inspect wiring, connectors, and components.

2. What is the typical cause of a P0344 fault code in a Dodge vehicle?

A typical cause of a P0344 fault code in a Dodge vehicle is a faulty Camshaft Position (CMP) Sensor or related wiring issues.

3. How can I diagnose and repair a P0344 fault code in my Dodge vehicle?

Diagnose P0344 by checking CMP sensor, wiring, and PCM. Look for damaged components or poor connections. Repair as needed for Dodge vehicle.

Wrap Up

If your Dodge is displaying OBD code p0344 and experiencing rough idling, stalling, or difficulty starting, it may be caused by a faulty camshaft position sensor, damaged wiring harness, poor sensor connection, or low engine oil level affecting sensor performance.

To address Dodge OBD code p0344, check the camshaft position sensor and its wiring for any signs of wear or damage.

Ensure the sensor is securely connected and functioning correctly.

Consider replacing the sensor if necessary and inspect the wiring harness for any issues that may affect sensor signal transmission.