[SOLVED] Dodge P0335 Code: Fast Fix For Crankshaft Position Sensor

The OBD code P0335 for Dodge indicates a problem with the crankshaft position sensor circuit.

This affects the engine’s timing and fuel injection system.

Symptoms include the engine light on, power loss, and potential stalling.

Causes can be a faulty sensor, wiring issues, or damaged components.

It’s a serious issue that needs attention.

To fix, inspect the sensor, wiring, and connectors for any damage or poor connections.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The Dodge P0335 fault code indicates a problem with the crankshaft position sensor circuit.

  • With Dodge OBD code P0335, the Engine Light will be ON.
  • Engine may lack or lose power.
  • The engine may stall while driving.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Dodge fault code p0335 include faulty crankshaft position sensor or wiring issues.

  • P0335 can be caused by a faulty crankshaft position sensor.
  • A crankshaft position sensor harness that is open or shorted.
  • A crankshaft position sensor circuit with poor electrical connection.
  • A damaged signal plate.
  • A faulty starter motor.
  • A faulty starting system circuit.
  • A dead or weak battery.

Replace the crankshaft position sensor on the Dodge vehicle to address fault code P0335.

  • To fix the Dodge OBDII code p0335, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
  • Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • Next, check the crankshaft position sensor for proper operation and connection.
  • Test the sensor’s resistance and signal output.
  • If the sensor is faulty, replace it with a new one.
  • Clear the fault codes from the vehicle’s computer using a scan tool.
  • Finally, start the vehicle and ensure the code does not return, indicating a successful repair.

Diagnosing and repairing Dodge fault code p0335 typically involves testing and replacing the crankshaft position sensor.

The cost to diagnose and fix a Dodge OBD code P0335 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.

Dodge fault code P0335 relates to a crankshaft position sensor circuit malfunction.

Dodge OBD code P0335 means a crankshaft position sensor circuit malfunction.

This code is triggered by the Engine Control Module (ECM) when it detects an issue with the signal from the crankshaft position sensor.

The crankshaft position sensor is responsible for monitoring the position and speed of the crankshaft in the engine.

When the ECM receives erratic or no signal from the sensor, it sets code P0335. This code indicates a problem with the sensor itself, its wiring, or the connections between the sensor and the ECM.

For Dodge code P0335, check the crankshaft position sensor circuit for faults.

OBDII code P0335 for a Dodge typically indicates a crankshaft position sensor circuit malfunction.

To diagnose, use a voltmeter to test the sensor’s wiring for proper voltage and continuity.

Check the sensor’s resistance values as well.

Inspect the sensor for physical damage or contamination.

Scan tools can help monitor sensor data and confirm proper signal output.

If no issues are found with the sensor or wiring, consider checking the engine’s timing belt or chain for proper alignment.

Replacing the crankshaft position sensor may be necessary if all other components check out.

1. What is the common cause of OBD code P0335 in a Dodge vehicle?

The common cause of OBD code P0335 in a Dodge vehicle is a faulty crankshaft position sensor or related wiring issues. Inspect and repair as needed.

2. How can I diagnose and fix a P0335 fault code in my Dodge vehicle?

Diagnose P0335 in Dodge: Check crankshaft position sensor, wiring, connectors for faults. Inspect signal plate, starter, battery. Repair as needed.

3. Is it safe to continue driving with a P0335 fault code in a Dodge vehicle, or should

It is not safe to continue driving with a P0335 fault code in a Dodge vehicle. Check and repair the crankshaft position sensor and related components immediately.

Dodge p0335 error fault code explained

If your Dodge is showing OBD code p0335 and experiencing stalling, rough idling, or difficulty starting, it may be due to a faulty crankshaft position sensor, damaged wiring harness, or poor sensor connection.

To address Dodge OBD code p0335, inspect the crankshaft position sensor and its wiring for any signs of damage or corrosion.

Test the sensor’s resistance and ensure proper connection at the sensor and ECU.

Replace the sensor if necessary and repair any wiring issues to resolve the problem.

Scroll to Top