[SOLVED] Dodge P0330 Code: Fast Fix For Knock Sensor Circuit

The OBD code P0330 for Dodge indicates a Knock Sensor 2 Circuit Malfunction.

This code affects the engine’s knock sensor system.

Symptoms include the Engine Light ON, engine lack/loss of power.

Causes can be a faulty knock sensor, poor electrical connection, open/shorted harness, or a faulty Engine Control Module.

It’s a moderate issue.

A possible fix is to inspect and repair any damaged wiring or connectors related to the knock sensor system.

Repair Importance Level	6.67 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	6.67 (Out of 10)

Symptoms of the Dodge p0330 OBD Code

The Dodge P0330 fault code indicates an issue with the knock sensor circuit malfunction.

With Dodge OBD code P0330, the Engine Light will be ON.
Engine may experience Lack / Loss of Power.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p0330 OBD Code

Possible reasons for Dodge fault code p0330 include issues with the knock sensor circuit or sensor itself.

P0330 can be caused by a faulty Knock Sensor 2.
A Knock Sensor 2 circuit with poor electrical connection.
An open or shorted Knock Sensor 2 harness.
Or a faulty Engine Control Module (ECM).

Fixing Dodge Error Code p0330 Step By Step

Replace the faulty knock sensor on the Dodge to address code P0330.

To fix the Dodge OBDII code P0330, start by reviewing the possible causes mentioned above and visually examining the corresponding wiring harness and connectors.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Test the crankshaft position sensor using a multimeter to ensure it is functioning correctly.
Replace the crankshaft position sensor if it is faulty.
Clear the fault codes using an OBDII scanner and test drive the vehicle to verify that the issue has been resolved.

Cost Of Fixing Dodge p0330 Fault Code

Diagnosing and repairing Dodge fault code P0330 involves testing and potentially replacing the knock sensor.

The cost to diagnose and fix a Dodge OBD code P0330 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p0330 OBD Code

Dodge fault code P0330 relates to a malfunction in the knock sensor circuit.

Dodge OBD code P0330 indicates a Knock Sensor 2 Circuit Malfunction (Bank 2).

This code is triggered by the Engine Control Module (ECM) when it detects an issue with the signal from the knock sensor 2 in bank 2 of the engine.

The knock sensor detects abnormal vibrations or knocking in the engine, which helps the ECM adjust ignition timing to prevent engine damage.

If the knock sensor signal is weak or absent, the ECM sets code P0330.

Mechanic’s Tech Notes

Detailed information on diagnosing and repairing fault code P0330 in Dodge vehicles.

To diagnose and fix OBDII code P0330 in a Dodge, start by checking the crankshaft position sensor’s wiring harness and connectors for any damage or corrosion.

Use a voltmeter to test the sensor’s resistance and voltage output.

Ensure the sensor is properly aligned and has the correct air gap.

If no issues are found, consider replacing the crankshaft position sensor itself.

Additionally, using a scan tool, monitor the sensor’s data while the engine is running to check for any irregularities.

If necessary, perform a relearn procedure for the sensor.

FAQ

1. What are the common symptoms associated with OBD code P0330 in a Dodge vehicle?

Common symptoms of OBD code P0330 in a Dodge vehicle include Engine Light ON, engine lack of power. Causes may be faulty Knock Sensor 2 or related wiring issues.

2. What is the typical cause of OBD code P0330 in a Dodge vehicle?

The typical cause of OBD code P0330 in a Dodge vehicle is a faulty Knock Sensor 2, poor electrical connection, or issues with the ECM.

3. How can I diagnose and repair OBD code P0330 in my Dodge vehicle?

Diagnose and repair OBD code P0330 in your Dodge by checking Knock Sensor 2 and its circuit for faults. Inspect wiring harness and connectors for damage.

Wrap Up

If your Dodge is showing OBD code p0330 and experiencing engine misfires, stalling, or rough idling, it may be caused by a faulty knock sensor, wiring issues, or poor sensor connection.

The knock sensor detects engine vibrations and sends signals to the engine control module to adjust ignition timing.

To address Dodge OBD code p0330, check the knock sensor and its wiring harness for any signs of damage or corrosion.

Test the sensor’s resistance and ensure proper connection to the engine control module.

Replace the knock sensor if necessary to restore proper engine performance.