The OBD code P0325 for Dodge indicates a problem with the Knock Sensor Circuit.
Symptoms include the Engine Light ON, engine lack of power.
Causes may include a faulty knock sensor, poor electrical connection, or issues with the Engine Control Module.
This issue should be addressed promptly to prevent further engine damage.
A possible fix involves inspecting the wiring harness and connectors for any damage or corrosion.
Repair Importance Level | 6.67 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Dodge p0325 OBD Code
The Dodge is experiencing engine knock sensor circuit malfunction with fault code P0325.
- With OBD code P0325 on a Dodge, symptoms may include: Engine Light ON.
- Engine Lack / Loss of Power.
- Engine may exhibit knocking sounds.
- Vehicle may have difficulty starting.
Causes of the Dodge p0325 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Dodge fault code P0325 include faulty knock sensor, wiring issues, or engine mechanical problems.
- P0325 can be caused by a faulty Knock Sensor.
- A Knock Sensor circuit with poor electrical connection.
- An open or shorted Knock Sensor harness.
- A faulty Engine Control Module (ECM).
Fixing Dodge Error Code p0325 Step By Step
Replace the knock sensor on the Dodge vehicle to address fault code P0325.
- To fix a Dodge OBDII code P0325, first, review the possible causes related to the knock sensor circuit malfunction.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Replace the knock sensor if necessary.
- Clear the fault codes and perform a test drive to verify the repair.
Cost Of Fixing Dodge p0325 Fault Code
The repair for Dodge fault code P0325 involves diagnosing and fixing issues with the knock sensor circuit.
The cost to diagnose and fix a Dodge OBD code P0325 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150, excluding parts.
Costs may vary based on shop rates and the complexity of the repair.
Details of the Dodge p0325 OBD Code
Dodge fault code P0325 indicates a knock sensor circuit malfunction in the engine.
Dodge OBD code P0325 means that a knock sensor circuit malfunction has been detected.
This code is triggered by the Engine Control Module (ECM) when it detects an abnormal signal from the knock sensor circuit.
The knock sensor is responsible for detecting engine knocking or pinging, which can cause damage if not addressed.
When P0325 is set, it indicates a problem with the knock sensor circuit, which can lead to engine performance issues and potential damage if not resolved.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Dodge fault code P0325 related to the knock sensor circuit.
To diagnose and fix OBDII code P0325 on a Dodge, start by checking the knock sensor circuit for any faults.
Use a voltmeter to test the sensor’s resistance and ensure it falls within specifications.
Inspect the wiring harness and connectors for any damage, corrosion, or loose connections.
Verify the knock sensor signal using a scan tool to see if it matches engine conditions.
If necessary, replace the knock sensor and clear the fault code.
Additionally, ensure the engine is running smoothly to prevent false knock sensor readings.
FAQ
The common cause of OBD code P0325 in a Dodge vehicle is a faulty knock sensor or issues with the knock sensor circuit or wiring harness.
OBD code P0325 on your Dodge can cause Engine Light ON, engine power loss. Check Knock Sensor, wiring for faults, and ECM. Inspect connectors for damage.
Diagnose P0325 in a Dodge for Engine Light ON, lack of power. Check Knock Sensor, wiring for faults. Inspect connectors, harness for damage, corrosion.

Wrap Up
If your Dodge is showing OBD code P0325 and experiencing engine misfires, stalling, or rough idling, it may be caused by a faulty knock sensor, wiring issues, or poor sensor connection.
The knock sensor detects engine vibrations and sends signals to the engine control module to adjust ignition timing.
To address Dodge OBD code P0325, check the knock sensor and its wiring harness for any damage or corrosion.
Test the sensor’s resistance and ensure proper connection to the engine control module.
Replace the knock sensor if necessary to restore proper engine performance.
Resources
- Dodge B2517
- Dodge B2598
- Dodge C2204
- Dodge P0236
- Dodge B210e
- Dodge C1046
- Dodge B211f
- Dodge B225c
- Dodge B1d87
- Dodge C1043
- Dodge B2540
- Dodge B1ed2
- Dodge B25bd
- Dodge C10ec
- Dodge B259a
- Dodge B2336
- Dodge B251b
- Dodge C1036
- Dodge B224f
- Dodge C008f
- Dodge C123a
- Dodge B285e
- Dodge B251a
- Dodge C2507
- Dodge B219a
- Dodge B1e68
- Dodge C2205
- Dodge P0128
- Dodge P0052
- Dodge C1047