[SOLVED] Dodge P0306 Code: Fast Fix For Cylinder 6 Misfire

The OBD code P0306 for Dodge indicates a misfire in cylinder 6. This affects the ignition system.

Symptoms include engine light on, lack of power, hard starting, and engine hesitation.

Common causes are a faulty spark plug, clogged/faulty fuel injector, or ignition coil issues.

It’s a moderate issue that needs attention.

To fix, inspect and possibly replace the spark plug, fuel injector, or ignition coil for cylinder 6. Also, check wiring harnesses and connectors for any damage.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p0306 OBD Code

The Dodge P0306 fault code indicates a misfire in cylinder 6.

With Dodge OBD code P0306, the Engine Light will be ON.
Lack/loss of power may be experienced.
Hard start can occur.
Engine hesitation might be noticeable.

Causes of the Dodge p0306 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Fault code P0306 on a Dodge indicates a misfire in cylinder 6.

P0306 can be caused by a faulty spark plug 6.
Clogged or faulty fuel injector 6.
Faulty ignition coil 6.
Fuel injector 6 harness is open or shorted.
Fuel injector 6 circuit poor electrical connection.
Ignition coil 6 harness is open or shorted.
Ignition coil 6 circuit poor electrical connection.
Insufficient cylinder 6 compression.
Incorrect fuel pressure.
Intake air leak.

Fixing Dodge Error Code p0306 Step By Step

Address the misfire on cylinder 6 in a Dodge by checking spark plugs, ignition coil, and fuel injector.

To fix the Dodge OBDII code P0306, start by reviewing the possible causes related to cylinder 6 misfire.
Visually inspect the ignition system components such as spark plugs, ignition coils, and spark plug wires for any signs of wear or damage.
Test the compression in cylinder 6 to ensure it is within specifications.
Swap the ignition coil with another cylinder to see if the misfire follows.
Replace the spark plug if necessary.
Clear the fault code and test drive the vehicle to verify the repair.

Cost Of Fixing Dodge p0306 Fault Code

The repair for Dodge code P0306 may involve replacing the ignition coil, spark plug, or fuel injector.

The cost to diagnose and fix the Dodge OBD code P0306 is typically based on an estimated repair time of 1. 0 hour.

Labor rates range from $75 to $150 per hour, so the cost can vary between $75 and $150, excluding parts.

Factors like shop rates and the complexity of the repair can influence the final cost.

Details of the Dodge p0306 OBD Code

Dodge fault code P0306 indicates a misfire in cylinder 6.

Dodge OBD code P0306 means a misfire was detected in cylinder 6. It’s triggered by the Engine Control Module (ECM) based on crankshaft speed fluctuations.

This code indicates that cylinder 6 is not contributing properly to the engine’s operation, causing a rough running condition.

Misfires can be caused by issues such as faulty spark plugs, ignition coils, fuel injectors, or low compression in the cylinder.

The ECM monitors the crankshaft speed to detect variations caused by misfires in specific cylinders, triggering a fault code like P0306 when it detects a misfire in cylinder 6.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P0306, including possible causes and diagnostic steps for resolution.

To diagnose and fix OBDII code P0306 on a Dodge, start by checking the ignition system components like spark plugs, ignition coils, and spark plug wires for any issues.

Use a voltmeter to test the ignition coil’s primary and secondary circuits for proper resistance values.

Inspect the fuel injector for clogs or malfunctions.

Perform a compression test to check the engine’s mechanical condition.

Additionally, scan the vehicle for any pending or stored codes that could provide more insight into the issue.

Consider performing a power balance test to identify any cylinderspecific misfires.

Addressing these areas can help pinpoint and resolve the misfire causing P0306 efficiently.

FAQ

1. What are the common causes of OBD code P0306 in a Dodge vehicle?

Common causes of OBD code P0306 in a Dodge vehicle include faulty spark plug 6, clogged/faulty fuel injector 6, faulty ignition coil 6, and poor electrical connections.

2. How can I diagnose and fix a misfire related to OBD code P0306 in my Dodge?

Diagnose P0306 misfire in Dodge: Check spark plug, fuel injector, ignition coil 6. Inspect wiring for damage, connector pins for issues. Fix as needed.

3. Is it safe to continue driving my Dodge with OBD code P0306,

It is not safe to continue driving with OBD code P0306 on a Dodge. Check spark plug, fuel injector, ignition coil, wiring for issues.

Wrap Up

If your Dodge is experiencing a rough idle or misfiring with OBD code P0306, it could be caused by a faulty ignition coil, spark plug, fuel injector, or low compression in cylinder 6. Wiring issues or a vacuum leak may also contribute to this fault code.

To address Dodge OBD code P0306, start by inspecting the ignition coil, spark plug, and fuel injector for cylinder 6. Check the wiring harness and connectors for any damage or corrosion.

Perform a compression test on cylinder 6 to ensure engine health.