[SOLVED] Dodge P0302 Code: Fast Fix For Cylinder Misfire

The OBD code P0302 for Dodge indicates a misfire in cylinder 2. This affects the ignition system.

Symptoms include engine light on, lack of power, hard starting, and engine hesitation.

Common causes are a faulty spark plug, clogged fuel injector, or ignition coil issues.

It’s a moderate issue that needs attention.

To fix, inspect and possibly replace the spark plug, fuel injector, or ignition coil, and check related wiring for any damage.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge p0302 OBD Code

The Dodge has a misfire in cylinder 2, indicated by fault code P0302.

With Dodge OBD code P0302, the engine light will be ON.
Lack/loss of power may be experienced.
Hard starting could occur.
Engine hesitation might be noticeable.

Causes of the Dodge p0302 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Dodge fault code P0302 include ignition system issues and fuel injector problems.

P0302 for Dodge can be caused by: Faulty Spark Plug #2.
Clogged or faulty Fuel Injector #2.
Faulty Ignition Coil #2.
Fuel Injector #2 harness is open or shorted.
Fuel Injector #2 circuit poor electrical connection.
Ignition Coil #2 harness is open or shorted.
Ignition Coil #2 circuit poor electrical connection.
Insufficient cylinder 2 compression.
Incorrect fuel pressure.
Intake air leak.

Fixing Dodge Error Code p0302 Step By Step

Address the misfire on cylinder 2 in a Dodge by checking spark plugs, ignition coils, and fuel injectors.

To fix a Dodge OBDII code P0302, start by reviewing the possible causes related to cylinder 2 misfire.
Visually inspect the ignition system components such as spark plugs, ignition coils, and spark plug wires for any signs of wear or damage.
Check the fuel injector for proper operation and ensure it is delivering fuel to the cylinder.
Test the compression in cylinder 2 to verify engine mechanical condition.
If all components check out, consider swapping the ignition coil or fuel injector with another cylinder to see if the misfire follows.
Finally, reset the engine control module (ECM) to clear the code and monitor for any recurrence.

Cost Of Fixing Dodge p0302 Fault Code

Diagnosing and repairing Dodge fault code P0302 typically involves addressing cylinder 2 misfire issues.

The cost to diagnose and fix a Dodge OBD code P0302 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p0302 OBD Code

Dodge fault code P0302 indicates a misfire in cylinder 2.

Code P0302 means a misfire was detected in cylinder 2 of the engine.

It’s triggered by the Engine Control Module (ECM) based on variations in crankshaft speed that indicate a misfire in that specific cylinder.

This code is typically caused by issues such as faulty spark plugs, ignition coils, fuel injectors, or low compression in that particular cylinder.

The ECM monitors the engine’s operation through the crankshaft position sensor and detects misfires by analyzing changes in engine speed caused by incomplete combustion in the cylinder.

Mechanic’s Tech Notes

Detailed information on diagnosing and repairing Dodge fault code P0302 related to cylinder 2 misfire.

To diagnose and fix OBDII code P0302 on a Dodge, start by checking the ignition system components like spark plugs, ignition coils, and spark plug wires for cylinder 2. Use a voltmeter to test the ignition coil’s primary and secondary circuits for proper voltage and resistance.

Inspect the fuel injector for cylinder 2 for proper operation and connectivity.

Perform a compression test on cylinder 2 to check for any internal engine issues.

Additionally, check for vacuum leaks that could affect cylinder 2’s performance.

Clear the code after repairs and monitor for recurrence.

FAQ

1. What are the common causes of OBD code P0302 in a Dodge vehicle?

Common causes of OBD code P0302 in a Dodge vehicle include faulty spark plug #2, clogged fuel injector #2, faulty ignition coil #2, or poor electrical connections.

2. How can I diagnose and fix a misfire related to OBD code P0302 in my Dodge?

Diagnose P0302 by checking spark plug, fuel injector, ignition coil #2, compression, fuel pressure, and intake air leak. Inspect wiring and connectors for damage.

3. Is it safe to continue driving my Dodge with OBD code P0302,

It is not safe to continue driving with OBD code P0302 on a Dodge. Address the faulty spark plug, fuel injector, or ignition coil on cylinder 2 immediately.

Wrap Up

If your Dodge is running rough and the check engine light is on with OBD code P0302, it indicates a misfire in cylinder 2. Possible causes include a faulty spark plug, ignition coil, fuel injector, or low compression.

To address Dodge OBD code P0302, start by inspecting the spark plug, ignition coil, and fuel injector for any signs of damage or wear.

Test the compression in cylinder 2 to ensure it meets specifications.

Check the wiring harness and connectors for any issues that may be affecting the components’ performance.