[SOLVED] Dodge P0172 Code: Resolve Dodge Lean Fuel System Quickly

The OBD code P0172 for Dodge indicates a System Too Rich (Bank 1) condition.

It affects the fuel system.

Symptoms include the Engine Light ON, excessive fuel consumption.

Causes may include a faulty front heated oxygen sensor, spark plugs, MAF sensor, exhaust gas leaks, ignition misfiring, incorrect fuel pressure, faulty fuel injectors.

It’s a moderate issue.

A possible fix is to inspect and potentially replace the faulty components mentioned above and check wiring harness and connectors for damage.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge p0172 OBD Code

The Dodge P0172 fault code indicates a rich airfuel mixture in the engine.

Symptoms: Engine Light ON.
Excessive Fuel Consumption.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p0172 OBD Code

Possible reasons for Dodge fault code P0172 include a rich airfuel mixture due to various issues.

P0172 can be caused by a Faulty Front Heated Oxygen Sensor.
A Faulty Spark Plugs.
A Faulty Mass Air Flow (MAF) sensor.
Exhaust Gas Leaks.
Ignition Misfiring.
Incorrect Fuel Pressure.
Or Faulty Fuel Injectors.

Fixing Dodge Error Code p0172 Step By Step

Addressing a rich fuel condition can resolve Dodge P0172 fault code.

To fix the Dodge OBDII code P0172, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Check the intake system for vacuum leaks or unmetered air entering the engine.
Clean or replace the Mass Air Flow (MAF) sensor if contaminated.
Inspect the fuel pressure and fuel injectors for proper operation.
Reset the Engine Control Module (ECM) and perform a fuel trim reset.
If the issue persists, consider replacing the oxygen (O2) sensor downstream of the catalytic converter.

Cost Of Fixing Dodge p0172 Fault Code

The repair for Dodge code P0172 may involve diagnosing and fixing a rich fuel condition.

The cost to diagnose and fix a Dodge OBD code P0172 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost could be around $75 to $150, depending on shop rates and the complexity of the issue.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge p0172 OBD Code

Dodge fault code P0172 indicates a rich fuel mixture in bank 1.

Dodge OBD code P0172 means that the fuel system is running too rich in bank 1. This code is triggered by the Engine Control Module (ECM) based on the oxygen sensor readings.

The ECM monitors the oxygen sensor’s signal to determine if the airfuel mixture is too rich (too much fuel compared to air) in bank 1 of the engine.

This can be caused by issues such as a faulty oxygen sensor, a vacuum leak, a malfunctioning fuel injector, or a problem with the fuel pressure regulator.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P0172, indicating a rich fuel condition in bank 1.

To diagnose and fix OBDII code P0172 on a Dodge, start by checking the fuel pressure with a gauge to ensure it meets specifications.

Inspect the intake system for leaks that could cause a rich condition.

Use a scan tool to monitor longterm fuel trims and oxygen sensor data to pinpoint the issue.

Check the MAF sensor for contamination or damage, as it can affect fuel mixture.

Verify the operation of the fuel injectors and their wiring harness for any faults.

Lastly, inspect the PCV system for proper operation, as a malfunction can lead to a rich fuel mixture.

FAQ

1. What are the common causes of OBD code P0172 in a Dodge vehicle?

Common causes of OBD code P0172 in a Dodge vehicle include faulty front heated oxygen sensor, faulty spark plugs, faulty MAF sensor, exhaust gas leaks, and ignition misfiring.

2. How can I diagnose and fix a P0172 fault code in my Dodge vehicle?

Diagnose P0172 in Dodge: Check front O2 sensor, spark plugs, MAF sensor, exhaust leaks, misfires, fuel pressure, injectors. Inspect wiring, connectors for damage.

3. Will driving with a P0172 fault code in a Dodge vehicle cause further damage to the engine or

Driving with a P0172 code in a Dodge can cause engine damage. Symptoms include the engine light on and excessive fuel consumption. Check and repair the listed causes promptly.

Wrap Up

If your Dodge is displaying OBD code P0172 and experiencing symptoms like rough idling, decreased fuel efficiency, or a strong fuel smell, it could be caused by a vacuum leak, faulty oxygen sensor, clogged fuel injectors, or a dirty air filter.

To address Dodge OBD code P0172, start by checking for any vacuum leaks in the intake system, inspect the oxygen sensor for proper operation, clean or replace clogged fuel injectors, and ensure the air filter is clean and not restricting airflow.