The OBD code P014C for Dodge indicates an issue with the Oxygen (O2) Sensor 1/2 (Sensor 1 / Bank 1).
This affects the exhaust system.
Symptoms include the Engine Light being ON.
Causes can be a faulty O2 sensor, engine misfire, or exhaust leak.
It’s a moderate issue.
To fix, inspect wiring harness, connectors, and components for damage or corrosion.
| Repair Importance Level | 6.67 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Dodge p014c OBD Code
The Dodge fault code P014C indicates an issue with the fuel delivery system.
- Symptoms: Engine Light ON.
- Possible decrease in engine performance.
- Rough idling.
- Hesitation during acceleration.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Dodge p014c OBD Code
Possible triggers for Dodge fault code P014C include issues with the fuel system or oxygen sensor.
- P014C can be caused by excessive fuel entering the aftertreatment / exhaust system.
- A faulty Mass Air Flow (MAF) sensor.
- An engine misfire.
- An intake leak.
- An exhaust leak.
- A faulty EGR system.
- A faulty Oxygen (O2) Sensor 1/2 (Sensor 1 / Bank 1) (Upstream / Bank 1).
- A faulty Oxygen (O2) Sensor Module.
Fixing Dodge Error Code p014c Step By Step
To resolve Dodge fault code P014C, inspect and replace the O2 sensor bank 1 sensor 2.
- To fix the Dodge OBDII code P014C, review the possible causes related to the code.
- Visually examine the wiring harness and connectors associated with the oxygen sensor circuit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Replace the oxygen sensor if necessary.
- Clear the fault codes and perform a test drive to verify the repair.
Cost Of Fixing Dodge p014c Fault Code
Diagnosing and repairing fault code P014C on a Dodge may involve replacing the fuel injector.
The cost to diagnose and fix the Dodge OBD code P014C typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
The final cost depends on labor rates, shop fees, and the complexity of the repair needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Dodge p014c OBD Code
Dodge fault code P014C relates to a fuel delivery system issue.
Dodge OBD code P014C means the O2 Sensor Delayed Response Lean to Rich Bank 1 Sensor 1. This code is triggered when the oxygen sensor located before the catalytic converter on bank 1 takes too long to respond to changes in the airfuel mixture, indicating a lean to rich condition.
The component that triggers this code is the upstream oxygen sensor (sensor 1) on bank 1 of the engine.
This sensor is responsible for monitoring the oxygen content in the exhaust gases before they enter the catalytic converter.
The signal or system involved in this fault code is the engine control module (ECM), which detects the delayed response of the oxygen sensor and sets the P014C trouble code to alert the driver or technician of a potential issue with the airfuel mixture on bank 1 of the engine.
Mechanic’s Tech Notes
Detailed information on Dodge fault code P014C, including symptoms, causes, and repair procedures.
To diagnose and fix OBDII code P014C in a Dodge, start by visually inspecting the wiring harness and connectors related to the Transmission Control Module (TCM).
Look for any damage or corrosion on the connector pins.
Use a multimeter to check TCM power and ground connections.
Utilize a scan tool to confirm TCM communication over the CAN network.
If no issues are found during these checks, consider reprogramming the TCM as a potential fix.
FAQ
OBD code P014C in a Dodge indicates an issue with Oxygen (O2) Sensor 1/2 (Sensor 1/Bank 1). Check sensor, wiring, and connectors for damage or corrosion.
Common symptoms for P014C in a Dodge include Engine Light ON, rough engine operation, and potential fuel/exhaust system issues. Inspect MAF sensor, EGR system, and O2 sensors for faults.
Diagnose P014C in Dodge: Check MAF sensor, engine misfire, intake/exhaust leaks, EGR system, O2 sensors. Inspect wiring/connectors for damage, corrosion, bent pins.
Wrap Up
If your Dodge is displaying OBD code p014c, you may experience poor engine performance, rough idling, or decreased fuel efficiency.
This code typically indicates a fault with the bank 1 sensor 1 oxygen sensor, possibly due to sensor failure, wiring issues, or a faulty connector.
To address Dodge OBD code p014c, start by inspecting the wiring harness and connectors for any damage or corrosion.
Test the oxygen sensor’s resistance and voltage output to determine if it needs replacement.
Ensure proper connection and integrity of the sensor’s wiring to resolve the issue effectively.
