The OBD code P0123 for Dodge indicates an issue with the throttle position sensor (TPS).
This code affects the engine management system.
Symptoms include the Check Engine light being illuminated.
Common causes are a faulty TPS, open or shorted TPS harness, poor electrical connections, or a faulty Powertrain Control Module (PCM).
This is a moderate issue.
To fix it, inspect the TPS wiring and connectors for any damage or corrosion.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Dodge p0123 OBD Code
The vehicle may experience issues related to the throttle position sensor circuit malfunction (Dodge P0123).
- Symptoms: Engine Light ON.
- Reduced engine power.
- Throttle response may be delayed.
- Vehicle may stall or have trouble starting.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Dodge p0123 OBD Code
P0123 in Dodge vehicles typically indicates an issue with the throttle position sensor circuit high input.
- P0123 can be caused by a faulty throttle position sensor.
- A throttle position sensor harness that is open or shorted.
- A throttle position sensor circuit with poor electrical connection.
- Or a faulty Powertrain Control Module (PCM).
Fixing Dodge Error Code p0123 Step By Step
Address the issue by inspecting the throttle position sensor circuit for Dodge fault code P0123.
- To fix a Dodge OBDII code P0123, start by reviewing the possible causes mentioned above.
- Visually examine the throttle position sensor (TPS) wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found, repair or replace the damaged components as necessary.
- Reset the engine control module (ECM) to clear the fault code.
- Test drive the vehicle to ensure the code does not return.
Cost Of Fixing Dodge p0123 Fault Code
Diagnosing and repairing Dodge code P0123 typically involves testing and replacing the throttle position sensor.
The cost to diagnose and fix a Dodge OBD code P0123 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.
Details of the Dodge p0123 OBD Code
Dodge code P0123 relates to an issue with the throttle position sensor high input.
Dodge OBD code P0123 means that the Engine Control Module (ECM) has detected a high voltage signal from the Throttle Position Sensor (TPS).
The TPS is the component that triggers this fault code.
The TPS is responsible for monitoring the position of the throttle valve and sending this information to the ECM.
When the ECM receives a high voltage signal from the TPS, it triggers code P0123, indicating a potential issue with the TPS or its circuit.
Mechanic’s Tech Notes
For Dodge code P0123, check throttle position sensor circuit high voltage issues.
To diagnose and fix OBDII code P0123 on a Dodge, start by checking the throttle position sensor (TPS) circuit.
Use a voltmeter to test the TPS sensor’s voltage signal.
Ensure the sensor is receiving proper voltage and ground.
Inspect the wiring harness and connectors for any damage, corrosion, or loose connections.
Verify TPS data using a scan tool to see if it correlates with actual throttle position.
If necessary, recalibrate or replace the TPS sensor.
Additionally, check for any issues with the powertrain control module (PCM) that may be causing the fault code.
FAQ
Symptoms of OBD code P0123 in a Dodge: Engine Light ON. Causes: Faulty throttle position sensor, wiring issues. Fix: Inspect sensor, wiring for damage, check connectors for corrosion.
The most common cause of OBD code P0123 in Dodge vehicles is a faulty throttle position sensor or issues with the sensor circuit or wiring harness.
To fix OBD code P0123 in your Dodge vehicle, check the throttle position sensor, wiring harness, and connectors for faults or damage. Repair or replace as needed.

Wrap Up
If your Dodge is displaying OBD code P0123 along with symptoms like rough idling, stalling, or poor acceleration, it could indicate a problem with the Throttle Position Sensor (TPS), wiring issues, or a faulty TPS circuit.
The P0123 code specifically points to a high voltage input from the TPS sensor to the Engine Control Module (ECM).
To address Dodge OBD code P0123, start by inspecting the TPS sensor and its wiring harness for any signs of damage or corrosion.
Test the TPS sensor’s output voltage and ensure proper connection at
Resources
- Dodge P0041
- Dodge C1040
- Dodge C0037
- Dodge C1009
- Dodge B2315
- Dodge B1d87
- Dodge B25bc
- Dodge B2318
- Dodge B2310
- Dodge B1e72
- Dodge B23c7
- Dodge B2847
- Dodge C2108
- Dodge B1eb7
- Dodge C006a
- Dodge B2314
- Dodge B285e
- Dodge B23bc
- Dodge P0040
- Dodge C2200
- Dodge C212c
- Dodge B25c8
- Dodge B2598
- Dodge B2768
- Dodge B1f03
- Dodge B1ed1
- Dodge B2504
- Dodge C123a
- Dodge B232e
- Dodge B287f