[SOLVED] Dodge P0017 Code: Resolve Dodge Crankshaftcamshaft Timing Misalignment

The OBD code P0017 for Dodge indicates a Crankshaft Position Camshaft Position Correlation error.

It affects the engine’s timing system.

Symptoms include the Engine Light being ON.

Causes may include dirty engine oil, faulty sensors, or timing gear misalignment.

This issue should be addressed promptly to prevent engine damage.

A possible fix involves inspecting and repairing the wiring harness and connectors related to the sensors.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge p0017 OBD Code

The Dodge P0017 fault code typically triggers when there is a crankshaft position camshaft position correlation error.

Symptoms: Engine Light ON.
Rough idling.
Engine stalling.
Poor acceleration.
Decreased fuel efficiency.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge p0017 OBD Code

The fault code P0017 on a Dodge typically indicates a problem with the crankshaft position sensor.

P0017 can be caused by engine oil dirty.
Incorrect engine viscosity.
Crankshaft position sensor circuit is open or shorted.
Camshaft position sensor circuit is open or shorted.
Faulty crankshaft position sensor.
Faulty camshaft position sensor.
Timing gear misalignment.

Fixing Dodge Error Code p0017 Step By Step

Address the Dodge P0017 code by inspecting the camshaft position sensor and adjusting timing if necessary.

To fix the Dodge OBDII code P0017, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Check the camshaft and crankshaft position sensors for proper alignment and operation.
Replace the camshaft or crankshaft position sensor if necessary.
Perform a relearn procedure for the camshaft and crankshaft positions.
Clear the fault codes and test drive the vehicle to verify the repair.

Cost Of Fixing Dodge p0017 Fault Code

The repair for Dodge code P0017 typically involves replacing the camshaft position sensor or adjusting the timing.

The cost to diagnose and fix a Dodge OBD code P0017 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

Costs depend on shop rates, complexity of the repair, and any additional parts needed.

Details of the Dodge p0017 OBD Code

Dodge P0017 code indicates a crankshaft position camshaft position correlation error.

Dodge OBD code P0017 means that the ECM has detected that the crankshaft and exhaust camshaft are not synchronized.

This is typically triggered by a correlation issue between the crankshaft position sensor and the exhaust camshaft position sensor.

The signal or system involved in this fault code is the camshaft position sensor circuit.

Mechanic’s Tech Notes

Detailed information on Dodge fault code P0017, including symptoms, causes, and repair procedures.

To diagnose and fix OBDII code P0017 on a Dodge, start by checking the camshaft position sensor’s wiring harness and connectors for any damage or corrosion.

Use a voltmeter to test the sensor’s voltage and resistance values.

Next, inspect the camshaft phaser for proper operation and timing.

Consider using a scan tool to monitor camshaft and crankshaft position sensor data while the engine is running to identify any discrepancies.

If necessary, perform a relearn procedure for the camshaft position sensor.

Additionally, ensure the engine oil is clean and at the correct level, as dirty or low oil can affect camshaft timing.

FAQ

1. What are the common causes of OBD code P0017 in a Dodge vehicle?

Common causes of OBD code P0017 in a Dodge vehicle include dirty engine oil, incorrect viscosity, faulty sensors, timing gear misalignment. Inspect wiring harness and connectors for damage.

2. How can I diagnose and fix OBD code P0017 in my Dodge vehicle?

Diagnose and fix OBD code P0017 in your Dodge: Check engine oil, inspect sensor circuits, sensors, timing gear alignment, and wiring for damage or corrosion.

3. Is it safe to continue driving with OBD code P0017 present in a Dodge vehicle?

It is not safe to continue driving with OBD code P0017 in a Dodge. Check engine oil, sensors, wiring, and timing gear for issues.

Wrap Up

If your Dodge is displaying OBD code P0017, you may experience rough idling, poor acceleration, or engine stalling.

This code typically indicates a problem with the camshaft position sensor, crankshaft position sensor, or their wiring.

Issues like incorrect oil viscosity, low oil level, or timing chain problems can also trigger this fault code.

To address Dodge OBD code P0017, start by inspecting the camshaft and crankshaft position sensors for proper operation and connection.

Check the wiring harness for any signs of damage, corrosion, or loose connections.

Consider replacing faulty sensors or repairing