[SOLVED] Dodge P0014 Code: Fast Fix For Dodge Exhaust Error

The OBD code P0014 for Dodge indicates a camshaft position timing overadvanced or system performance issue.

It affects the Variable Cam Timing (VCT) system.

Symptoms include the Engine Light being ON.

Causes can be dirty engine oil, faulty VCT solenoid, or PCM issues.

While not an immediate threat, it can affect engine performance.

A possible fix is to inspect and repair any damaged wiring or connectors related to the VCT system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The Dodge P0014 fault code may cause engine performance issues related to camshaft position.

  • Symptoms: Engine Light ON.
  • Rough idling.
  • Engine stalling.
  • Poor acceleration.
  • Decreased fuel efficiency.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

The fault code P0014 on a Dodge typically indicates a camshaft position timing overadvanced issue.

  • P0014 can be caused by engine oil dirty or contaminated.
  • Incorrect engine oil viscosity.
  • Faulty Variable Cam Timing (VCT) solenoid.
  • Variable Cam Timing solenoid circuit is open or shorted.
  • Variable Cam Timing solenoid circuit poor electrical connection.
  • Faulty Powertrain Control Module (PCM).

Addressing Dodge P0014 involves inspecting and potentially replacing the camshaft position actuator solenoid.

  • To fix the Dodge OBDII code P0014, review the possible causes related to the camshaft position actuator solenoid circuit.
  • Visually inspect the wiring harness and connectors for any damage.
  • Check the connector pins for signs of being broken, bent, pushed out, or corroded.
  • Replace the camshaft position actuator solenoid if necessary.
  • Clear the fault codes and perform a test drive to verify the repair.

Diagnosing and repairing Dodge code P0014 typically involves addressing issues with the camshaft position actuator solenoid.

The cost to diagnose and fix the Dodge OBD code P0014 typically ranges from $75 to $150, based on a repair time estimate of 1. 0 hour.

Factors like shop rates and the complexity of the repair can influence the final cost.

Dodge fault code P0014 indicates a camshaft position timing overadvanced or system performance issue.

Dodge OBD code P0014 means B Camshaft Position Timing OverAdvanced or System Performance Bank 1. This code is triggered when the camshaft position sensor detects that the exhaust camshaft is overadvanced compared to the desired position set by the ECM.

The signal involved in this code is related to the camshaft position sensor and the camshaft phaser actuator, which controls the camshaft timing.

Detailed information on Dodge fault code P0014, including symptoms, causes, and repair procedures.

To diagnose and fix OBDII code P0014 on a Dodge, start by checking the wiring harness and connectors related to the camshaft position actuator solenoid.

Use a voltmeter to test for proper voltage supply and ground connections.

Inspect the connector pins for any damage, corrosion, or poor connections.

If everything looks good, consider testing the camshaft position actuator solenoid itself for proper operation.

A scan tool can help monitor the camshaft position sensor data and verify if it aligns with the desired values.

If necessary, reprogramming or replacing the camshaft position actuator solenoid may be required to resolve the P0014 fault code.

1. What are the common causes of OBD code P0014 in a Dodge vehicle?

Common causes of OBD code P0014 in a Dodge vehicle include dirty engine oil, incorrect viscosity, faulty VCT solenoid, open/shorted circuit, poor electrical connection, or PCM issue.

2. How can I diagnose and fix OBD code P0014 in my Dodge vehicle?

Diagnose P0014 in Dodge: Check dirty oil, VCT solenoid, wiring, PCM. Inspect connectors for damage, corrosion. Fix as needed.

3. Is it safe to continue driving with OBD code P0014 present in a Dodge vehicle?

It is not safe to continue driving with OBD code P0014 in a Dodge. Check engine oil, VCT solenoid, wiring, and connectors for issues.

Dodge p0014 error fault code explained

If your Dodge is displaying OBD code P0014, you may experience rough idling, poor acceleration, or engine stalling.

This code typically indicates an issue with the exhaust camshaft position sensor, wiring problems, or low engine oil levels affecting the variable valve timing system.

To address Dodge OBD code P0014, start by checking the exhaust camshaft position sensor and its wiring harness for any damage or loose connections.

Ensure the engine oil level is correct and of good quality.

If necessary, replace the sensor and repair any wiring issues to restore proper variable valve timing operation.

Scroll to Top