[SOLVED] Dodge C145D Code: Quick Fix For Dodge Awd Clutch Circuit

The OBD code C145D for Dodge indicates an issue with the Electronically Controlled Clutch (ECC) Solenoid circuit in the All Wheel Drive (AWD) system.

Symptoms include the AntiLock Brake System (ABS) and Engine warning lights being illuminated.

The problem is commonly caused by a faulty ECC Solenoid or related wiring issues.

This is a moderate issue that should be addressed promptly.

To fix it, inspect the ECC Solenoid, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge c145d OBD Code

The Dodge C145D fault code may be accompanied by ABS warning light illumination and erratic brake behavior.

Symptoms: AntiLock Brake System (ABS) Warning Light ON.
Engine Light ON (or Service Engine Soon Warning Light).
Possible loss of ABS functionality.
Brake pedal may feel different than usual.
Unusual noises coming from the ABS system.

Causes of the Dodge c145d OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge fault code C145D include issues with the steering angle sensor or related wiring.

Causes: Faulty Electronically Controlled Clutch (ECC) Solenoid.
ECC Solenoid harness is open or shorted.
ECC Solenoid circuit poor electrical connection.
Faulty All Wheel Drive (AWD) Control Module.

Fixing Dodge Error Code c145d Step By Step

Resolve Dodge fault code C145D by inspecting and repairing the steering angle sensor circuit.

To fix the Dodge OBDII code C145D, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the ABS module.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, proceed to test the ABS module for proper operation.
Reset the module if necessary or replace it if a fault is detected.
Finally, clear the fault code and test drive the vehicle to ensure the issue has been resolved.

Cost Of Fixing Dodge c145d Fault Code

The repair for Dodge fault code C145D may involve diagnosing and replacing the steering angle sensor.

The cost to diagnose and fix Dodge OBD code C145D typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.

Factors like shop rates and complexity of the issue can influence the final cost.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge c145d OBD Code

Dodge fault code C145D relates to the Steering Angle Sensor Internal Failure.

Dodge OBD code C145D indicates an issue with the Park Brake Control Module Requested MIL Illumination.

This code is triggered by the Park Brake Control Module when it detects a fault in the system that requires the Malfunction Indicator Lamp (MIL) to be illuminated.

The MIL is the Check Engine Light on the dashboard that alerts the driver to a potential issue with the vehicle’s emissions control system.

Mechanic’s Tech Notes

For Dodge code C145D, check for issues with the left rear wheel speed sensor circuit.

To diagnose and fix OBDII code C145D in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve the issue causing the C145D fault code.

FAQ

1. What does OBD code C145D indicate in a Dodge vehicle?

OBD code C145D in a Dodge indicates an issue with the Electronically Controlled Clutch (ECC) Solenoid circuit. Check wiring, connectors, and ECC Solenoid for faults.

2. What are the common symptoms associated with OBD code C145D in a Dodge vehicle?

Common symptoms of OBD code C145D in a Dodge vehicle include ABS warning light on, engine light on, caused by faulty ECC solenoid or wiring issues.

3. How can I diagnose and repair OBD code C145D in my Dodge vehicle?

Diagnose OBD code C145D in Dodge: Symptoms ABS & Engine Lights ON. Causes Faulty ECC Solenoid, harness issues, AWD Control Module. Fix Inspect wiring, connectors for damage.

Wrap Up

If your Dodge is displaying OBD code c145d, you may experience issues with the steering angle sensor.

This could be caused by a faulty sensor, damaged wiring, or poor connections in the steering angle sensor circuit.

To address Dodge OBD code c145d, check the wiring harness and connectors related to the steering angle sensor.

Look for any signs of damage, corrosion, or loose connections.

Consider replacing the sensor if necessary to resolve the steering angle sensor issue.