[SOLVED] Dodge C1078 Code: Fast Fix For Tire Revolution Range

The OBD code C1078 for Dodge indicates an incorrect value programmed into the Totally Integrated Power Module (TIPM), affecting the AntiLock Brake System (ABS).

Symptoms include the ABS warning light and engine light being illuminated.

This issue is moderate in severity.

To fix it, visually inspect the wiring harness, connectors, and TIPM for any damage or corrosion, ensuring connector pins are intact.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge c1078 OBD Code

The Dodge C1078 fault code typically triggers when there is an issue with the right rear wheel speed sensor.

Symptoms: AntiLock Brake System (ABS) Warning Light ON.
Engine Light ON (or Service Engine Soon Warning Light).
Possible loss of ABS functionality.
Brake pedal may feel different during braking.
Unusual noises from the ABS system.

Causes of the Dodge c1078 OBD Code

Dodge fault code C1078 typically indicates a malfunction in the right rear wheel speed sensor circuit.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

C1078 can be caused by a faulty wheel speed sensor.
A broken sensor connector.
Low voltage in the ABS system.
Corroded ground connections.
Or signal loss between the sensor and the TIPM.

Fixing Dodge Error Code c1078 Step By Step

Resolve Dodge fault code C1078 by inspecting the wheel speed sensor and related wiring for issues.

To fix Dodge OBDII code C1078, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Check the connector pins for signs of being broken, bent, pushed out, or corroded.
Ensure all connections are secure and free of corrosion.
Test the wheel speed sensors for proper operation and signal output.
Replace any faulty wheel speed sensors as needed.
Clear the fault codes and test drive the vehicle to verify the repair.

Cost Of Fixing Dodge c1078 Fault Code

The repair for Dodge fault code C1078 may involve replacing the steering angle sensor.

The cost to diagnose and fix Dodge OBD code C1078 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

The total cost depends on labor rates, shop fees, and the complexity of the repair needed.

Details of the Dodge c1078 OBD Code

Dodge fault code C1078 relates to an issue with the rear right wheel speed sensor.

Dodge OBD code C1078 means Right Rear Actuator Circuit Short to Battery.

This code is triggered by the Antilock Brake System (ABS) module when it detects a short to battery in the right rear actuator circuit.

The ABS module monitors the wheel speed sensors and actuator circuits to ensure proper braking function and stability control.

When this fault is detected, it indicates a wiring issue or a short circuit in the right rear actuator circuit that needs to be diagnosed and repaired to restore proper ABS operation.

Mechanic’s Tech Notes

For Dodge code C1078, check the left rear wheel speed sensor circuit for issues.

OBDII code C1078 in a Dodge typically points to a fault with the Transmission Control Module (TCM).

To diagnose, check TCM power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect wiring harnesses and connectors for damage, and check connector pins for any issues like being broken, bent, pushed out, or corroded.

This thorough inspection can help pinpoint the root cause of the C1078 code.

FAQ

1. What does OBD code C1078 indicate in a Dodge vehicle?

OBD code C1078 in a Dodge indicates an incorrect value programmed into the TIPM. Symptoms include ABS and Engine warning lights. Inspect wiring and connectors for damage.

2. What are the common symptoms associated with OBD code C1078 in a Dodge vehicle?

Common symptoms for OBD code C1078 in a Dodge vehicle include ABS warning light and engine light on. Causes may be incorrect TIPM value. Fix: Check wiring and connectors.

3. How can I diagnose and repair OBD code C1078 in my Dodge vehicle?

Diagnose and repair OBD code C1078 in your Dodge by checking TIPM programming, inspecting wiring harness, connectors, and pins for damage, bending, or corrosion.

Wrap Up

If your Dodge is displaying OBD code c1078 and you’re experiencing issues with the ABS system, it could be caused by a faulty wheel speed sensor, damaged wiring harness, or poor electrical connection at the sensor.

To address Dodge OBD code c1078, start by inspecting the wheel speed sensor and its wiring for any visible damage.

Test the sensor’s resistance and check for proper voltage supply.

Ensure connectors are clean and securely attached to the sensor.

Replace the sensor if necessary to resolve the ABS system problem.