The OBD code C1041 for Dodge indicates an issue with the Left Front Wheel Speed Sensor (WSS) circuit.
Symptoms include the AntiLock Brake System (ABS) Warning Light and Engine Light being ON.
Causes may include a dirty tone wheel or sensor, faulty sensor, or wiring issues.
This is a serious problem affecting ABS functionality.
To fix, inspect and clean the sensor, tone wheel, and wiring connections for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Dodge c1041 OBD Code
The Dodge C1041 fault code may be accompanied by ABS warning light illumination.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Unusual noises from the ABS system.
- Braking performance may be affected.
- It’s important to address these symptoms promptly to ensure safe driving conditions.
Causes of the Dodge c1041 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Dodge fault code C1041 include issues with the ABS control module or wheel speed sensors.
- C1041 can be caused by a dirty left front tone wheel.
- A dirty left front wheel speed sensor (WSS).
- A faulty left front wheel speed sensor (WSS).
- An open or shorted left front wheel speed sensor (WSS) harness.
- A poor electrical connection in the left front wheel speed sensor (WSS) circuit.
- Damage to the left front tone wheel.
Fixing Dodge Error Code c1041 Step By Step
Resolve Dodge C1041 by inspecting the ABS module for internal faults and addressing any issues found.
- To fix the Dodge OBDII code C1041, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the ABS module for proper operation and communication.
- Replace the ABS module if necessary.
- Clear the fault codes and perform a road test to verify the repair.
Cost Of Fixing Dodge c1041 Fault Code
Diagnosing and repairing Dodge code C1041 typically involves inspecting and possibly replacing the ABS hydraulic pump motor circuit.
The cost to diagnose and fix Dodge OBD code C1041 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
The final cost depends on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Dodge c1041 OBD Code
Dodge fault code C1041 relates to an issue with the right rear wheel speed sensor circuit.
Dodge OBD code C1041 means Left Rear Wheel Speed Sensor Circuit Signal Erratic.
This code is triggered by the AntiLock Brake System (ABS) module when it detects erratic or inconsistent signals from the left rear wheel speed sensor.
The ABS module monitors individual wheel speeds to ensure proper braking performance and stability control.
When the signal from the left rear wheel speed sensor is erratic, it can affect the ABS system’s ability to function correctly, potentially compromising vehicle safety.
Mechanic’s Tech Notes
For Dodge code C1041, check ABS module power and ground circuits for faults.
OBDII code C1041 in a Dodge typically points to a fault in the Transmission Control Module (TCM).
To diagnose, check TCM power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing might be necessary.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help pinpoint the issue and guide you towards an effective repair.
FAQ
OBD code C1041 in a Dodge indicates an issue with the Left Front Wheel Speed Sensor (WSS) circuit. Check for sensor or wiring faults.
Common symptoms of OBD code C1041 in a Dodge vehicle include ABS Warning Light ON, Engine Light ON, caused by issues with left front wheel speed sensor components.
Diagnose and repair OBD code C1041 in your Dodge by checking the left front wheel speed sensor, tone wheel, wiring, and connectors for damage or poor connections.
Wrap Up
If your Dodge is displaying OBD code c1041, you may experience issues with the Electronic Brake Control Module (EBCM) communication circuit.
This could be caused by faulty wheel speed sensors, damaged wiring harnesses, or poor connections at the EBCM.
To address Dodge OBD code c1041, start by inspecting the wheel speed sensors for any signs of damage or corrosion.
Check the wiring harness for any breaks or chafing that could be affecting communication.
Ensure all connections at the EBCM are secure and free of debris or corrosion.
Replace any faulty sensors or repair damaged wiring as
