[SOLVED] Dodge C1036 Code: Fast Fix For Dodge Rear Wheel Speed Sensor

The OBD code C1036 for Dodge indicates an issue with the Rear Wheel Speed Sensor circuit in the AntiLock Brake System (ABS).

Symptoms include the ABS Warning Light and Engine Light being illuminated.

This is commonly caused by a faulty Rear Wheel Speed Sensor or related wiring issues.

It is a moderate issue that should be addressed promptly.

To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge c1036 OBD Code

The Dodge C1036 fault code typically triggers when there is an issue with the right front wheel speed sensor.

Symptoms: AntiLock Brake System (ABS) Warning Light ON.
Engine Light ON (or Service Engine Soon Warning Light).
Possible loss of ABS functionality.
Brake pedal may feel different than usual.
Unusual noises coming from the ABS system.

Causes of the Dodge c1036 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible issues with Dodge C1036 include faulty wheel speed sensor, damaged wiring, or ABS module problems.

C1036 can be caused by a Faulty Rear Wheel Speed Sensor.
A Rear Wheel Speed Sensor harness that is open or shorted.
A Rear Wheel Speed Sensor circuit with a poor electrical connection.

Fixing Dodge Error Code c1036 Step By Step

To resolve Dodge fault code C1036, inspect the steering angle sensor and related wiring for issues.

To fix the Dodge OBDII code C1036, start by reviewing the possible causes and visually examining the wiring harness and connectors.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Test the wheel speed sensor circuits for proper operation and continuity.
Inspect the wheel speed sensors for any physical damage or debris that may be affecting their performance.
Replace any faulty wheel speed sensors or repair damaged wiring as necessary.
Clear the fault codes and perform a test drive to ensure the issue has been resolved.

Cost Of Fixing Dodge c1036 Fault Code

Diagnosing and repairing Dodge code C1036 involves inspecting and possibly replacing the left front wheel speed sensor.

The cost to diagnose and fix Dodge OBD code C1036 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge c1036 OBD Code

Dodge fault code C1036 relates to an issue with the right front wheel speed sensor circuit.

Dodge OBD code C1036 indicates an issue with the right rear wheel speed sensor circuit.

This code is triggered by the AntiLock Brake System (ABS) module when it detects a circuit malfunction or abnormal signal from the right rear wheel speed sensor.

The ABS module uses the signals from the wheel speed sensors to monitor individual wheel speeds and control braking to prevent wheel lockup during braking.

If the ABS module detects a fault with the right rear wheel speed sensor circuit, it will set the C1036 fault code.

Mechanic’s Tech Notes

For Dodge code C1036, check the left rear wheel speed sensor circuit for issues.

OBDII code C1036 in a Dodge typically points to a fault with the Transmission Control Module (TCM).

To diagnose, check TCM power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect wiring harnesses and connectors for damage, and check connector pins for any issues like breakage, bending, or corrosion.

This thorough inspection can help pinpoint the root cause of the C1036 code.

FAQ

1. What does OBD code C1036 indicate in a Dodge vehicle?

OBD code C1036 in a Dodge indicates an issue with the rear wheel speed sensor circuit. Check for faults in the sensor, harness, or connections.

2. What are the common symptoms associated with OBD code C1036 in a Dodge vehicle?

Common symptoms for OBD code C1036 in a Dodge: ABS Warning Light ON, Engine Light ON. Causes: Faulty Rear Wheel Speed Sensor, harness issues. Fix: Inspect and repair sensor and wiring.

3. How can I diagnose and repair OBD code C1036 in my Dodge vehicle?

Diagnose and repair OBD code C1036 in your Dodge by checking the rear wheel speed sensor, harness, and connections for faults. Inspect for damage or corrosion.

Wrap Up

If your Dodge is displaying OBD code c1036 and you’re experiencing issues with the ABS system, it could be caused by a faulty wheel speed sensor, damaged wiring harness, or poor electrical connection at the sensor.

To address Dodge OBD code c1036, start by inspecting the wheel speed sensor and its wiring for any visible damage.

Test the sensor’s resistance and check for proper voltage supply and ground connection.

Replace the sensor if necessary and ensure all connections are secure.