[SOLVED] Dodge C1035 Code: Fast Fix For Right Rear Wheel Speed

The OBD code C1035 for Dodge indicates a fault in the Right Rear Wheel Speed Sensor circuit of the AntiLock Brake System (ABS).

Symptoms include the ABS Warning Light and Engine Light being illuminated.

Possible causes are tire air pressure mismatch, a faulty sensor, wiring issues, or a defective ABS Module.

This issue should be addressed promptly to ensure safe braking.

A potential fix involves inspecting and repairing any damaged wiring or connectors related to the Right Rear Wheel Speed Sensor.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge c1035 OBD Code

The Dodge C1035 fault code typically triggers when there is an issue with the left rear wheel speed sensor.

Symptoms: AntiLock Brake System (ABS) Warning Light ON.
Engine Light ON (or Service Engine Soon Warning Light).
Possible loss of ABS functionality.
Brake pedal may feel different during braking.
Unusual noises from the ABS system.

Causes of the Dodge c1035 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Dodge fault code C1035 include issues with the left rear wheel speed sensor.

C1035 can be caused by tire air pressure mismatch.
A faulty Right Rear Wheel Speed Sensor.
The Right Rear Wheel Speed Sensor harness being open or shorted.
A poor electrical connection in the Right Rear Wheel Speed Sensor circuit.
A faulty AntiLock Brake System (ABS) Module.

Fixing Dodge Error Code c1035 Step By Step

Resolve Dodge C1035 by inspecting and repairing the left rear wheel speed sensor circuit.

To fix the Dodge OBDII code C1035, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the ABS system.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Test the wheel speed sensors for proper operation and connection.
Inspect the ABS module for any signs of damage or corrosion.
Reset the ABS module using a scan tool to clear any stored fault codes.
If the issue persists, consider replacing the ABS module with a new one.

Cost Of Fixing Dodge c1035 Fault Code

The repair for Dodge fault code C1035 may involve replacing the left rear wheel speed sensor.

The cost to diagnose and fix Dodge OBD code C1035 typically ranges from $75 to $150, based on a 1. 0hour repair time.

Factors like shop rates and complexity can affect the final cost.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge c1035 OBD Code

Dodge fault code C1035 relates to a right rear wheel speed sensor circuit failure.

Dodge OBD code C1035 indicates an issue with the right rear wheel speed sensor circuit.

This code is triggered by the AntiLock Brake System (ABS) module when it detects a malfunction in the circuit related to the right rear wheel speed sensor.

The ABS module monitors the speed of each wheel using sensors to ensure proper braking performance and stability control.

When the right rear wheel speed sensor circuit fails or malfunctions, the C1035 trouble code is set, indicating a problem that needs to be diagnosed and repaired to restore proper ABS function.

Mechanic’s Tech Notes

For Dodge C1035, this section provides detailed information on the specific fault or error code.

To diagnose and fix OBDII code C1035 on a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of corrosion, bending, or breakage.

This thorough inspection can help identify and resolve the issue causing the C1035 fault code.

FAQ

1. What does OBD code C1035 indicate in a Dodge vehicle?

OBD code C1035 in a Dodge indicates an issue with the Right Rear Wheel Speed Sensor circuit. Check for tire pressure mismatch and inspect sensor and wiring for faults.

2. What are the common symptoms associated with OBD code C1035 in a Dodge vehicle?

Common symptoms of OBD code C1035 in a Dodge vehicle include ABS warning light on, engine light on, caused by issues like faulty wheel speed sensor or ABS module.

3. How can I diagnose and repair OBD code C1035 in my Dodge vehicle?

Diagnose OBD code C1035 in Dodge: Symptoms ABS & Engine Lights ON. Causes Tire pressure mismatch, faulty RR wheel speed sensor. Fix Inspect wiring, connectors, sensor, ABS module.

Wrap Up

If your Dodge is displaying OBD code c1035, you may experience issues with the right rear wheel speed sensor circuit.

This could be caused by a faulty wheel speed sensor, damaged wiring, or poor connections in the circuit.

To address Dodge OBD code c1035, start by inspecting the right rear wheel speed sensor and its wiring harness for any visible damage.

Check the sensor’s connector for corrosion or loose pins.

Test the sensor’s resistance and ensure proper signal output to the ABS module.

Replace the sensor or repair any damaged wiring as needed.