The OBD code C101F for Dodge indicates a fault in the Right Front Wheel Speed Sensor circuit of the AntiLock Brake System (ABS).
Symptoms include the ABS Warning Light and Engine Light being illuminated.
Possible causes are tire air pressure mismatch, a faulty sensor, or issues with the sensor’s harness or connections.
This issue should be addressed promptly to ensure safe braking operation.
To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Dodge c101f OBD Code
The Dodge C101F fault code may indicate issues with the ABS system.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Unusual noises from the ABS module.
- Braking performance may be affected.
- Difficulty maintaining traction in slippery conditions.
Causes of the Dodge c101f OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Dodge fault code C101F include wheel speed sensor issues and wiring faults.
- C101F can be caused by tire air pressure mismatch.
- A faulty Right Front Wheel Speed Sensor.
- The Right Front Wheel Speed Sensor harness being open or shorted.
- A poor electrical connection in the Right Front Wheel Speed Sensor circuit.
- A faulty AntiLock Brake System (ABS) Module.
Fixing Dodge Error Code c101f Step By Step
Resolve Dodge C101F by inspecting and repairing the ABS module power supply circuit as needed.
- To fix the Dodge OBDII code C101F, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, perform a reset on the ABS module using a diagnostic scan tool.
- Test drive the vehicle to see if the code returns.
- If the code persists, consider replacing the ABS module with a new one and program it to the vehicle as needed.
Cost Of Fixing Dodge c101f Fault Code
The repair for Dodge fault code C101F may involve diagnosing and replacing faulty wheel speed sensor components.
The cost to diagnose and fix the Dodge OBD code C101F depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Dodge c101f OBD Code
Dodge fault code C101F relates to an ABS hydraulic pump motor circuit failure.
Dodge OBD code C101F indicates a fault with the ABS hydraulic pump motor circuit.
This code is triggered by the ABS control module when it detects an electrical malfunction in the hydraulic pump motor circuit.
The ABS control module monitors the voltage and current to the hydraulic pump motor to ensure proper operation of the ABS system.
If a fault is detected in the circuit, the C101F trouble code is set, indicating a problem with the ABS hydraulic pump motor circuit.
Mechanic’s Tech Notes
For Dodge code C101F, refer to detailed diagnostic information for troubleshooting guidance and solutions.
OBDII code C101F in a Dodge may indicate a communication issue with the Transmission Control Module (TCM).
To diagnose, check TCM power and ground using a multimeter.
Verify TCM response over the Controller Area Network (CAN) network with a scan tool.
Visually inspect wiring harness and connectors for damage, focusing on broken, bent, or corroded pins.
Reflash the TCM if necessary.
This process helps ensure proper communication between modules, potentially resolving the C101F fault code.
FAQ
OBD code C101F in a Dodge indicates an issue with the Right Front Wheel Speed Sensor circuit. Check for tire pressure mismatch and inspect sensor and wiring.
Diagnose C101F in Dodge: Check for tire pressure mismatch, faulty RF wheel speed sensor, harness issues, or ABS module fault. Inspect wiring and connectors for damage or corrosion.
Common symptoms of a C101F trouble code in a Dodge vehicle include ABS warning light on, engine light on, caused by issues like faulty wheel speed sensor or ABS module.
Wrap Up
If your Dodge is displaying OBD code c101f and experiencing ABS system malfunctions or erratic wheel speed sensor readings, it could be caused by faulty wheel speed sensors, damaged wiring harnesses, or poor electrical connections at the ABS control module.
To address Dodge OBD code c101f, inspect the wheel speed sensors for damage or contamination, check the wiring harness for any signs of wear or corrosion, and ensure secure connections at the ABS control module.
Replace any faulty sensors or repair damaged wiring as needed.
