[SOLVED] Dodge C1015 Code: Fast Fix For Dodge Wheel Speed Sensor

The OBD code C1015 for Dodge indicates a fault with the Right Front Wheel Speed Sensor circuit in the AntiLock Brake System (ABS).

Symptoms include the ABS Warning Light and Engine Light being illuminated.

This is commonly caused by a faulty sensor, wiring issues, or a malfunctioning ABS Module.

It is a moderate issue that should be addressed promptly.

To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge c1015 OBD Code

The Dodge C1015 fault code typically triggers when there is an issue with the wheel speed sensor.

Symptoms: AntiLock Brake System (ABS) Warning Light ON.
Engine Light ON (or Service Engine Soon Warning Light).
Possible loss of ABS functionality.
Brake pedal may feel different than usual.
Unusual noises coming from the ABS system.

Causes of the Dodge c1015 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Dodge fault code C1015 include wheel speed sensor issues or wiring faults.

C1015 can be caused by a Faulty Right Front Wheel Speed Sensor.
A Right Front Wheel Speed Sensor harness that is open or shorted.
A Right Front Wheel Speed Sensor circuit with poor electrical connection.
A Faulty AntiLock Brake System (ABS) Module.

Fixing Dodge Error Code c1015 Step By Step

Resolve Dodge C1015 by inspecting and repairing the wheel speed sensor circuit for the left front wheel.

To fix the Dodge OBDII code C1015, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the ABS module.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring and connectors, proceed to test the ABS module for proper operation.
Reset or reprogram the ABS module if necessary.
Consider replacing the ABS module if all other steps do not resolve the C1015 fault code.

Cost Of Fixing Dodge c1015 Fault Code

The repair for Dodge fault code C1015 typically involves replacing the steering angle sensor.

The cost to diagnose and fix Dodge OBD code C1015 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.

Details of the Dodge c1015 OBD Code

Dodge fault code C1015 relates to the right rear wheel speed sensor circuit.

Dodge OBD code C1015 means Right Rear Wheel Speed Sensor Circuit.

This code is triggered by the AntiLock Brake System (ABS) module when an issue is detected with the right rear wheel speed sensor circuit.

The ABS module monitors the speed of each wheel using sensors to ensure proper braking and stability control.

When a fault is detected in the circuit of the right rear wheel speed sensor, the C1015 trouble code is set.

Mechanic’s Tech Notes

For Dodge code C1015, check the ABS module for internal faults or communication issues.

OBDII code C1015 in a Dodge typically points to a fault with the Transmission Control Module (TCM).

To diagnose, check TCM power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect wiring harnesses and connectors for damage, and check connector pins for any issues like being broken, bent, pushed out, or corroded.

This thorough inspection can help pinpoint the root cause of the C1015 code.

FAQ

1. What does OBD code C1015 indicate in a Dodge vehicle?

OBD code C1015 in a Dodge indicates an issue with the right front wheel speed sensor circuit. Check sensor, harness, and connections for faults.

2. How can I diagnose the cause of OBD code C1015 in my Dodge?

Diagnose OBD code C1015 in Dodge by checking right front wheel speed sensor, harness, and ABS module for faults. Inspect wiring and connectors for damage or corrosion.

3. What are the common symptoms associated with OBD code C1015 in a Dodge vehicle?

Common symptoms of OBD code C1015 in a Dodge vehicle include ABS warning light on, engine light on, caused by faulty right front wheel speed sensor or related wiring issues.

Wrap Up

If your Dodge is displaying OBD code c1015 along with ABS or traction control warning lights, it may indicate a fault in the right rear wheel speed sensor circuit.

This could be caused by a damaged wheel speed sensor, faulty wiring connections, or a corroded sensor connector.

To address Dodge OBD code c1015, start by inspecting the right rear wheel speed sensor and its wiring harness for any visible damage.

Test the sensor for proper operation and check the connector for corrosion or loose pins.

Replace the sensor if necessary and ensure all connections are secure to resolve the issue.